Corp. Computer Hardware User Manual

14
Using the House Sync Signal
This section describes how to:
Select which edge of the house sync signal to use as the trigger
Double the trigger frequency from the house sync signal
Properly handle interlaced house sync signals
Introduce a timing delay to the house sync signal
From the NVIDIA Control Panel Select a Task pane, under
Workstation, click Synchronize Displays.
Make sure that the On this system radio button under The timing
server is selected.
Open the Server Settings dialog box using one of the following
methods:
From the Synchronize Displays page, click Edit Settings, or
From the NVIDIA Control Panel navigation tree pane, under
Workstation, click View System Topology, then right click the
display icon that is
designated to be
the server and click
Server Settings
4. Under The
synchronization pulses
are based on, click the
An external house sync
signal radio button.
The Server Settings dialog
box will show the
incoming house sync
frequency. A frequency
of 0.00 Hz indicates that
the system has not yet
been set as the server.




1.
2.
3.


NVIDIA Quadro G-Sync II User Guide