Corp. Computer Hardware User Manual

10
How To Set Up Genlock
The following are the basic steps to genlocking a system. Detailed
instructions are provided in the related sections:
Set Up the Hardware
Connect the external sync source to the BNC connector on the
graphics board.
Set Up the Software
Use the NVIDIA Control Panel Workstation->Synchronize displays
page to establish the system as the server, to choose the sync source,
and confi gure the sync pulse.
Set Up the Hardware
Start the system, then connect the external source signal to the House
Sync connector (BNC) of the Quadro G-Sync II option card.
The Quadro G-Sync II supports the following external
synchronization signal types:
TTL (3.3 volt level)
Composite Bi-level (NTSC or PAL sources use bi-level composite
signals)
Composite Tri-level (HDTV sources commonly use tri-level
composite signals)


1.
¾
¾
¾
NVIDIA Quadro G-Sync II User Guide