User's Manual

Advance Information – Subject to Change
Provided Under NDA Getting Started – PDK2/3 Only??
16 Getting Started – PDK2/3 Only?? NVIDIA Proprietary and Confidential
I
n
t
e
r
n
a
l
D
r
a
f
t
R
e
v
i
e
w
C
o
p
y
2.5 Transferring Files Using USB
Files can be transferred on the baseboard using the USB in the following modes:
• “Mass Storage Class Mode” in Section 2.5.1
• “Media Transport Protocol Mode” in Section 2.5.2
2.5.1 Mass Storage Class Mode
Use the Mass Storage Class (MSC) mode for transferring files using USB to upgrade the
firmware. Follow these instructions:
1. To see the primary boot loader menu options, reset the board by simultaneously
pressing the reset switch and the SELECT key (SW5).
2. Select the PREVIOUS key (SW7) for Upgrade Firmware option.
3. Connect the USB cable, if not already done.
4. A removable disk of 16-MB displays in Windows Explorer (see Figure 8 on page 16).
5. Transfer (copy) the secondary boot loader and the firmware image (
*.mi4) file.
6. Safely remove the hardware from the PC by clicking the Safely Remove Hardware icon
in the system tray and following the instructions in the operating system instructions.
The device upgrades the firmware, resets automatically, and boots with the upgraded
image. Don’t see the need for this--can we strike it??
Figure 8: Using Mass Storage Class Mode