User's Manual

Advance Information – Subject to Change
Provided Under NDA Introduction
4 Introduction NVIDIA Proprietary and Confidential
I
n
t
e
r
n
a
l
D
r
a
f
t
R
e
v
i
e
w
C
o
p
y
1.3 Product Development Kit Contents
1.3.1 Contents – All Kits
This section describes the standard contents for Product Development Kits (PDKs).
Documentation
• Application porting guide
•Quick Start Guide
•Welcome note
• Regional contact list
•NDA form
Hardware
• Baseboard containing either Preface Module 1 or Preface Module 2. (For module
details, see Section 1.4 on page 7.)
• An LCD, either of the following:
• 2.5-inch QVGA
• 3.5-inch QVGA with touch screen
• Lithium polymer battery: In a finished product, the PMD can derive its power from the
host computer’s battery; therefore, a dedicated PMD battery is optional. The
baseboard contains such a battery. If needed, the SoC can support a charge out.
PLEASE CHECK!!
• USB input connector and cable
• Connectors and solder pads for other I/O buses and signals
• Power on/off switch??
Software
• FTP key to all common downloadables
• Gadgets and gadget bridge
• NVIDIA/CompanionLink gadget demo suite
• Standard embedded firmware
1.3.2 Contents – Individual Kits
In addition to the standard contents described above, the PDKs contain the specialized
components described in this section.
PDK1
This PDK is primarily for prototyping or gadget development. It contains the following
components:
• 724_A01 baseboard with PM1 or PM2
• External seven-key keypad
•FTP1 key