User's Manual
- 23 -
nVIDIA MCP61 Series User's Manual
・
Press <Esc> key to return to "Onboard Device Conguration" menu.
These options allow you to Enabled/Disabled for Floppy Controller, onboard LAN
Control set the addresses for Serial Port1& Port2.
• AZALIA AUDIO
Options:Auto,Disabled
• Lan Controller
Options:Auto,Disabled
• Saming/BootRom Control
MAC LAN rom boot Set
• Onboard Floppy Controller
Allows BIOS to Enable or Disable FLOPPY Controller
• Serial Port1 Address
Allows BIOS to Select Serial Port1 base Addresses.
• Serial Port2 Address
Allows BIOS to Select Serial Port2 base Addresses.
• Parallel Port Address
Allows BIOS to Parallel Port base Addresses.
• Parallel Port Mode
Allows BIOS to Select Parallel Port mode.
• Parallel Port IRQ
Allows BIOS to Select Parallel Port IRQ.
・
Press <Esc> key to return to "Advanced" menu.
►
PCIPnP
Click <Enter> key to enter its submenu.
• Legacy USB Support
Enabled or Disabled Legacy USB option, and Auto option disables legacy support if no USB
devices are connected.
• USB 2.0 Controller Mode
Allow you to selects the HiSpeed(480Mbps) or FullSpeed(12Mbps).
• BIOS EHCI Hand-Off
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change
should claim by EHCI driver.