User's Manual

TEGRA DEVELOPMENT SYSTEM END USER LICENSE AGREEMENT18

assembled before you plug it into a power outlet. Then insert the AC Power Adapter ﬁrmly

into the power outlet. Do not connect or disconnect the AC Power Adapter with wet hands.

• Operate the AC adapter in a ventilated area.

• When you’re using the Tegra 3 Developer Tablet or charging the battery, it is normal for the

system and/or AC power adapter to get warm.

• Do not use conductive tools that could bridge live parts

• Do not make mechanical or electrical modiﬁcations to the equipment.

• Never attempt to repair the Tegra 3 Developer Tablet yourself. The Tegra 3 Developer Tablet

does not contain any user-serviceable parts. Do not attempt to open your tablet,

disassemble, or remove the battery. You run the risk of electric shock.

• To clean the tablet display, use a soft, slightly damp, lint-free cloth. Avoid getting moisture

in openings. Don’t use window cleaners, household cleaners, aerosol sprays, solvents,

alcohol, ammonia, or abrasives to clean the display.

• Operate the Tegra 3 Developer Tablet in a place where the temperature is always between 0

and 40C (32 to 104F).

• Store the Tegra 3 Developer Tablet in a place where the temperature is always between

-20 and 60C (-4 to 140F). When taking the device from a low temperature condition, allow

the device to reach room temperature before turning the power on.

• If the product sustains damage requiring service, disconnect the product from the AC

electrical outlet and refer servicing to an NVIDIA authorized service provider.

WARNING: This tablet contains Lithium batteries. There is RISK OF EXPLOSION IF BATTERY

IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE

INSTRUCTIONS.

Power Rating

5V DC, 4A