User's Manual

TEGRA DEVELOPMENT SYSTEM END USER LICENSE AGREEMENT 17
standards around the world e.g. UL-60950-1. These standards reduce the risk of injury from the
following hazards:
• Electric shock: Hazardous voltage levels contained in parts of the product
• Fire: Overload, temperature, material flammability
• Mechanical: Sharp edges, moving parts, instability
• Energy: Circuits with high energy levels (240 volt amperes) or potential as burn hazards
• Heat: Accessible parts of the product at high temperatures
• Chemical: Chemical fumes and vapors
• Radiation: Noise, ionizing, laser, ultrasonic waves
Retain and follow all product safety and operating instructions. Always refer to the documentation
supplied with your equipment. Observe all warnings on the product and in the operating instructions.
Note: Read all safety information below and operating instructions before using the Tegra 3
Developer Tablet to avoid injury.
Note: Keep this guide handy for future reference.
WARNING: Failure to follow these safety instructions could result in fire, electric shock or
other injury or damage.
WARNING: Electrical equipment can be hazardous if misused. Operation of this product, or
similar products, must always be supervised by an adult. Do not allow children access to the
interior of any electrical product and do not permit them to handle any cables.
To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the safety
labels included on the equipment.
Symbols on Equipment
This symbol in conjunction with any of the following symbols indicates the presence of a
potential hazard. The potential for injury exists if warnings are not observed. Consult your
documentation for specific details.
This symbol indicates the presence of hazardous energy circuits or electric shock hazards.
Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no user or
field serviceable parts. Do not open for any reason.
WARNING: To reduce risk of injury from electric shock hazards, do not open this enclosure.
General Precautions
• To reduce the risk of electric shock, personal injury, or damage to the equipment, observe
the following precautions:
• Follow all cautions and instructions marked on the equipment.
• Do not bend, drop, crush, puncture, incinerate, or push objects into openings of the tablet.
• Do not connect or disconnect any cables or perform maintenance or reconfiguration of this
product during an electrical storm
• Do not use the Tegra 3 Developer Tablet in rain or near sink, or other wet locations. Take
care not to spill any food or liquid into the tablet. In case the Tegra 3 Developer Tablet gets
wet, unplug all cables and turn off before cleaning, and allow it to dry thoroughly before
turning it on again.
• Never turn on any equipment when there is evidence of fire, water, or structural damage.
• Place the product away from radiators, heat registers, stoves, amplifiers, or other
appliances that produce heat.
• Never force a connector into a port. Check for obstructions on the port. If the connector and
port don’t join with reasonable ease, they probably don’t match. Make sure that the
connector matches the port and that you have positioned the connector correctly in relation
to the port
• If you use an AC Power Adapter to charge tablet, make sure the power adapter is fully