User manual

Configuring the BIOS
65
Figure 15. PnP/PCI Configuration Menu
Init Display First
This function on the PnP/PCI Configuration menu allows you to
define if the initial display is in the PCI slot or in the PCI Express
slot. Options are
[PCI Slot] and [PCIEx].
Reset Configuration Data
This function on the PnP/PCI Configuration menu allows you to
enable or disable the resetting of Extended System Configuration
Data (ESCD) when you exit Setup. Set this to
[Enabled] if you
have installed a new add-on and the system reconfiguration has
caused a serious conflict that prevents the OS from booting. The
default setting is
[Disabled].
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to
define if the BIOS can automatically configure all the boot and plug-
and-play compatible devices or if you can manually select IRQ,
DMA, and memory base address fields. Select
[Auto(ESCD)] if you
want the BIOS to automatically populate these fields. If you select
[Manual] so you can assign the resources, IRQ Resources is
enabled for input.
Resources Controlled By [Manual)]
IR
Q
R
esou
r
ces
[
Pr
ess
En
te
r
]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter