Datasheet

11.17
Front panel component system
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
\
A = standard LED
B = low current LED
1) The low current LEDs can be used from 2 to 20 mA
(without reduction of lifespan), which means that a significantly
higher luminosity can be achieved.
Dimensions LEDs
Absolute maximum data
T
a
= 25 °C
ABABABABABAB
red, Ø 3.2 mm red, Ø 5 mm yellow, Ø 3.2 mm yellow, Ø 5 mm green, Ø 3.2 mm green, Ø 5 mm
Reverse voltage V 5 3 5 3 5 3 5 3 5 3 5 3
On-state current mA 253025302530253025302530
Power dissipation mW 100 75 100 75 100 75 100 75 100 75 100 75
Forward current mA
(t < 10 μs)
100 75 100 75 100 75 100 75 100 75 100 75
Forward voltage V
– type (10 mA/2 mA)
2.1 2.1 2.1 2.1 2.1 2.2 2.1 2.2 2.1 2.2 2.1 2.2
– max. (10 mA/2mA) 333333333333
Luminous intensity mcd
– at 2 mA
– 1.5 – 3.1 – 1.4 – 3.2 – 2 – 3.3
– at 10 mA
1)
1.8 13.4 2.2 25.1 2.7 13.4 3.4 28.6 3.2 24.6 3.9 25.7
– at 20 mA
1)
3.6 26.8 4.4 48.2 5.4 28.7 6.8 60.8 6.4 54.9 7.8 54.6
Wavelength nm
(10 mA/2 mA)
635 650 635 650 585 585 585 585 565 563 565 563
Thermal resistance °C/W 400 470 350 390 400 470 350 390 400 470 350 390
Angle of reflected beam  50°
Storage temperature –55 ... +100 °C
Operating temperature –55 ... +100 °C (low-current LED)/–40 ... +85 °C (Standard-LED)
Solder temperature 260 °C/max. 5 sec (processing advice for wave soldering: protect plastic body against solder wave)
Insulating body PBT (Crastin)
Flammability of insulation body UL 94 V-0