Datasheet

11.17
Front panel component system
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
\
A = standard LED
B = low current LED
1) The low current LEDs can be used from 2 to 20 mA
(without reduction of lifespan), which means that a significantly
higher luminosity can be achieved.
Dimensions LEDs
Absolute maximum data
T
a
= 25 °C
ABABABABABAB
red, Ø 3.2 mm red, Ø 5 mm yellow, Ø 3.2 mm yellow, Ø 5 mm green, Ø 3.2 mm green, Ø 5 mm
Reverse voltage V 5 3 5 3 5 3 5 3 5 3 5 3
On-state current mA 25 30 25 30 25 30 25 30 25 30 25 30
Power dissipation mW 100 75 100 75 100 75 100 75 100 75 100 75
Forward current mA
(t < 10 µs)
100 75 100 75 100 75 100 75 100 75 100 75
Forward voltage V
– type (10 mA/2 mA)
2.1 2.1 2.1 2.1 2.1 2.2 2.1 2.2 2.1 2.2 2.1 2.2
– max. (10 mA/2mA) 333333333333
Luminous intensity mcd
– at 2 mA
– 1.5 – 3.1 – 1.4 – 3.2 – 2 – 3.3
– at 10 mA
1)
1.8 13.4 2.2 25.1 2.7 13.4 3.4 28.6 3.2 24.6 3.9 25.7
– at 20 mA
1)
3.6 26.8 4.4 48.2 5.4 28.7 6.8 60.8 6.4 54.9 7.8 54.6
Wavelength nm
(10 mA/2 mA)
635 650 635 650 585 585 585 585 565 563 565 563
Thermal resistance °C/W 400 470 350 390 400 470 350 390 400 470 350 390
Angle of reflected beam  50°
Storage temperature –55 ... +100 °C
Operating temperature –55 ... +100 °C (low-current LED)/–40 ... +85 °C (Standard-LED)
Solder temperature 260 °C/max. 5 sec (processing advice for wave soldering: protect plastic body against solder wave)
Insulating body PBT (Crastin)
Flammability of insulation body UL 94 V-0
11_2_FES_e_.fm Seite 17 Montag, 24. September 2012 8:18 08