Datasheet

Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
6.12
Main Catalogue
E 10/2012
Subracks – D
Main CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿 Subrack with side panel type H ("heavy"),
19" bracket is firmly fixed to side panel (tox-cold welded)
쮿 Rear horizontal rail for backplane mounting with insulation
strip
쮿 Shock and vibration resistance up to 5 g
쮿 Installed load up to 15 kg
쮿 Versions with/without front handles
Delivery comprises (Kit)
Order Information
Note
쮿 ServicePLUS configuration from page 6.16
Kit, 'heavy', unshielded,
for backplane mounting
06102007 06111003
Without front handle With front handle
6 U
06111057
06108052
D = overall depth, D1 = insertion depth, D2 = board depth
04400001
Rear horizontal rail for backplane mounting with insulation strip
ServicePLUS see page 6.16
5
1
2b+3+4
2c+3+4
5
2a+3
1
6
D2
D1
D
Item Qty Description
3 U 6 U
1 2 2 Side panel type H, Al, 2 mm, passivated,
with 19" support bracket (tox-cold welded)
for textile EMC gasket
2a 2 2 Front horizontal rail (H-KD)
2b 2 2 Rear horizontal rail (H-ST)
2c - 1 Rear horizontal rail centre (H-ST)
3 4 6 Threaded insert, front and rear (pre-fitted)
4 2 4 Insulation strip (pre-fitted)
5 1 1 Fixing material kit, user manual
6 2 2 Front handle (on version with front handle only)
Height Width Depth D Depth D1 Part no. Part no.
U HP mm mm with front
handle
without
front
handle
3 84 175 175
24567-161 24563-161
3 84 235 175/235
24567-162 24563-162
3 84 295 175/235/295
24567-163 24563-163
3 84 355 175/235/295/355
24567-164 24563-164
6 84 175 175
24567-461 24563-461
6 84 235 175/235
24567-462 24563-462
6 84 295 175/235/295
24567-463 24563-463
6 84 355 175/235/295/355
24567-464 24563-464
Accessories
19" assembly kit (screw, washer, nut) (
8 × screws, 8 × plastic washers, 8 × cage nuts)
21100-435
Guide rails (standard), ESD clips
Depth D2 Qty/PU Part no.
mm piece
160 10
24560-351
220 10
24560-353
280 10
24560-379
340 10
24560-380
ESD clip for guide rails PU 50 pieces
24560-255
Torx panhead screw , for extra bolting of the guide rails,
2.5 × 9.3, zinc-plated, PU 100 pieces;
torque max. 0.2 Nm
24560-141
Cover plates for bolting to side panel
Depth D2 Width Qty/PU Part no.
mm HP piece
160 84 2
24560-078
220 84 2
24560-079
280 84 2
24560-080
340 84 2
24560-081
6_1_europacPRO_e_.fm Seite 12 Mittwoch, 10. Oktober 2012 1:19 13