Datasheet

Backplanes – Power backplanes
10.16
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 03/2009
11902001
11901002
ServicePLUS see page 10.31
Power backplanes
 Conforms to
– PICMG 2.9 R1.0 System Management Bus Specification
– PICMG 2.11 R1.0 CompactPCI Power Interface
Specification
 Can be switched in parallel, PSU status signals FAL# and
DEG# can be read separately
 Geographical address adjustable
 Mains supply via crimp contacts insertable into plug,
no mains voltage on the backplane
Delivery comprises
Order Information
Note
Screws, washers for backplane fitting see page 10.30
12401002
 Allows connection of pluggable power supplies, e.g. ATX PSUs,
to CompactPCI backplanes
 Simply mounts on the PSU screw connections on the rear of
Schroff CompactPCI backplanes
Delivery comprises
Order Information
Power backplanes with
P47 connector
Item Qty Description
1 1 Powerbackplane with 1 resp. 2 P 47 connectors
2 1/2 AC cable harness (P47 connector – open end, length
500 mm; 2 pieces at 2 P47 pin positions
3 1/2 DC cable harness (ATX connector – ATX ring tag,
length 250 mm; 2 pieces at 2 P47 pin positions
4 1 Blade receptacle kit for AC cable harness
Numbe
r of
slots
Width Height Description Part no.
mm U
1 39.6 3 1 connector position P47
23098-105
2 80.3 3
2 connector positions P47
(side-by-side)
23098-115
1 39.6 6
1 connector position P47
at top
23098-116
1 39.6 6
2 connector positions P47
(one above the other)
23098-117
Power piggyback
Item Qty Description
1 1 Power piggyback
Description Qty/PU Part no.
Power piggyback 1
23098-100
Buch Backplane.book Seite 16 Donnerstag, 23. April 2009 11:43 23