Datasheet

Cabinets – 19" lab racks
Main Catalogue www.schroff.biz
E 03/2009
Overview ........... 0
Cabinets ............ 1
Wall mounted
cases ............... 2
Accessories for
cabinets and wall
mounted cases .... 3
Climate control .... 4
Desk-top cases ....5
Subracks/
19" chassis ......... 6
Front panels,
plug-in units ....... 7
Systems ............ 8
Power supply
units ................ 9
Backplanes ....... 10
Connectors, front
panel component
system ............ 11
Appendix ......... 12
Downloads and further important information can be found
on the Internet under www.schroff.biz
1.286
19" lab racks
01305003
lra45330 vnt007 01505050
Cable ducting on the front and rear side Large selection of equipment shelves
Application/function
19" lab racks are freely accessible from all sides.
Subracks, 19" cases and 19" shelves can be mounted. Two angled steel
uprights are screw-fixed on the base part (mobile base/plinth and base
plate respectively). The 19" cut-outs of the steel uprights are recessed so
far that a flat surface for front panels is created. The two profiles are
connected by a cover plate which gives the rack additional stability.
The base/plinth of the mobile 19" lab rack has two fixed rear castors and
two locking castors at the front. The 100 mm roller diameter ensures both
good mobility and high stability.
A base plate from sheet steel forms the plinth for the stationary 19" lab
rack.
Standards/certifications
 Internal and external dimensions
in accordance with:
IEC 60297-3-100
Buch_Laborgestell.book Seite 286 Montag, 23. Februar 2009 7:09 07