Installation Manual

4 / 4THERMAL MANAGEMENT SOLUTIONS
EN-RaychemIceStopClipsbrackets-IM-H5669003/13
WWW.THERMAL.PENTAIR.COM
© 1999-2013 Pentair.
NORTH AMERICA
Tel: [phone]
Fax: [phone]
Tel: [phone]
Fax: [phone]
[e-mail]
EuROPE, MIddLE EAsT, AfRICA
Tel: [phone]
Fax: [phone]
[e-mail]
AsIA PACIfIC
Tel: [phone]
Fax: [phone]
[e-mail]
LATIN AMERICA
Tel: [phone]
Fax: [phone]
[e-mail]
Pentair and IceStop are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the
right to change specifications without prior notice.
GM-RAKE
Wide
orientation
Narrow
orientation
1
3A
4
GM-RAKE
2
3B
• BendtheGM-RAKEto
approximately 90°
• Insertcabletiesthrough
holes on the GM-RAKE
• TheGM-RAKEshould
be centered on the
edge of the downspout
to prevent mechanical
damage and to support
the heating cable
• UsetheGM-RAKEto
protect the heating cable
from sharp edges
• The GM-RAKE can also
be used in one of two
orientations in a wide
gutter as a spacer
• PositiontheGM-RAKEand
tighten the cable ties
• Trimoffexcesscabletie
Installing H915 in Downspout Installing H915 for Mechanical Protection