Installation Manual

3 / 4THERMAL MANAGEMENT SOLUTIONS
EN-RaychemIceStopClipsbrackets-IM-H5669003/13
Standing
seam
Prepared
surface
Adhesive
1
3
5 6
Adhesive
Adhesive
2
4
• Determineheatingcablelayoutandclipplacement
according to IceStop System Design and Installation
Guide (H56070)
• Prepareroofsurfaceperadhesivemanufacturer’s
specifications
• ApplyaliberalamountofadhesivetobacksideofGMK-RC
• Allowadhesivetocurepermanufacturer’sspecifications.
• Installheatingcable.
Adhesive Selection:
• SeeToolsRequiredsectiononpage1forappropriate
adhesive, recommended by roofing manufacturers.
• Placecliponpreparedsurface.Pressdowntoensure
adhesive flows through holes.
• Donottrimbackadhesivebeadsbecausetheyhelphold
the clip down.
• Completedinstallation.