Instruction Manual

nVent.com/RAYCHEM | 3
1/4 in
1/4 in
6
• Notch core at the end.
• Twist back and peel bus wires from core.
Mastic
1 in
2 in
8
Mastic
1/4 in
Pinch
9
• Remove release paper
from mastic strip.
• Wrap a piece of mastic
around the end of each
heating cable section
and position as shown.
• Use clean gloves.
• Remove release paper from mastic strip.
• Don't let dirt or particles get into mastic.
• Wrap a piece of mastic around the outer jacket on each
heating cable section.
• Pinch the mastic
in the center
to completely
seal the core at
the end of each
heating cable.
Do not cut
bus wires.
7
• Score between bus
wires at base jacket.
• Bend core to break
free at base jacket.
• Peel core and any
remaining material
from bus wires.
Repeat steps 2 through 6 for
other heating cable sections.