Installation Manual

The ElectroMelt termination and splicing components are used to terminate the
end of the heating cable to power conductors or to splice one length of heating
cable to another. These water-resistant electrical assemblies are sealed with a
proprietary Raychem adhesive and protected by an outer heat-shrinkable tube
manufactured by Raychem of crosslinked, modified polyolefin polymers.
Temperature rating 90ºF
Storage temperature -40ºF to 140ºF
Minimum installation temperature 30ºF
Power connection wire range 14 to 4 AWG
Voltage rating 600 Vac
Power connection and end seal
Catalog number EMK-XP
Part number 579519
Description Power connection and end seal kit
Packaging One power connection and one
Shipping weight 0.4 pound
Splice kit
Catalog number EMK-XS
Part number 356667
Description Splice kit
Packaging One splice kit per box
26
ElectroMelt System
Design Guide
EMK-XP
EMK-XS
Power Connection and End Seal Kit,
and Splice Kit
For Use with EM2-XR
Self-Regulating Heating Cable
end seal per box
6"
6"
10"
Power Connection EMK-XP
End Seal EMK-XP
Splice EMK-XS
Shipping Weight 0.2 pound
Description
Specifications
Odering Instructions