Cut Sheet

ManualsBrandsnVent Hoffman ManualsControl & AutomationType 3 Drive Enclosure, Replacement Filter

TYPE 3R WEATHERFLO TypE 3R VEnTEd EncLOsuREs

Spec-00161 I

EQUIPMENT PROTECTIONSUBJECT TO CHANGE WITHOUT NOTICECONTRACTOR1

SPEC-00161

763.422.2211

763.422.2600

CONTRACTOR

TYPE 3R

WEATHERFLO TYP E 3R VENTED ENCLO SURES

WEATHERFLO WITH FAN, TYPE 3R

INDUSTRY STANDARDS

UL 508A Listed; Type 3R; File Number E61997

cUL Listed per CSA C22.2 No 94; Type 3R; File Number E61997

NEMA/EEMAC Type 3R

IEC 60529, IP32

APPLICATION

WEATHERFLO Enclosures feature a forced-air ventilation system

for cooling drives or other high-heat producing equipment in

outdoor applications.

FEATURES

• White polyester powder finish with low solar absorption

• Integrated solar shield top and intake cover

• Gasket and filter

• Adjustable thermostat (70-140 F)

• Active cooling ventilation system with factory-installed fan and

filter (115 VAC)

• Terminal power connection for fan

• Easily accessible and washable metal filter

• Top front hood exhaust and door

• Lift-off hinged door

• Quarter-turn latch

• External mounting brackets

• Collar studs provided to mount the optional panel

• Grounding provision on door and body

• Gasketed door

SPECIFICATIONS

• 16 and 14 gauge galvanized steel

• Largest two sizes constructed of aluminum

FINISH

RAL 9003 white polyester powder texturized finish inside and out.

ACCESSORIES

Summary of content (4 pages)

PAGE 1
Type 3R WEATHERFLO Type 3R Vented Enclosures CONTRACTOR TYPE 3R WEATHERFLO TYPE 3R VENTED ENCLOSURES SPEC-00161 I 63.422.2211 7 763.422.2600 WEATHERFLOWITH FAN, TYPE 3R INDUSTRY STANDARDS SPECIFICATIONS UL 508A Listed; Type 3R; File Number E61997 cUL Listed per CSA C22.
PAGE 2
Type 3R WEATHERFLO Type 3R Vented Enclosures Standard Product Catalog Number WF3LP WF10LP WF25LP WF40LP WF75LP WF100LP AxBxC in./mm 29.00 x 24.00 x 12.00 737 x 610 x 305 35.00 x 24.00 x 12.00 889 x 610 x 305 41.00 x 24.00 x 12.00 1041 x 610 x 305 47.00 x 24.00 x 14.00 1194 x 610 x 356 56.00 x 36.00 x 16.00 1422 x 914 x 406 67.00 x 36.00 x 16.00 1702 x 914 x 406 Drive Horsepower (hp) 3 Panel A24P24 10 A30P24 25 A36P24 40 A42P24 75 A48P36 100 A60P36 Panel Size D x E in./mm 21.00 x 21.
PAGE 3
Type 3R WEATHERFLO Type 3R Vented Enclosures TECHNICAL INFORMATION This information is for guidance only; user is responsible for load values to evaluate the system. Catalog Number WF3LP WF10LP WF25LP WF40LP WF75LP WF100LP Drive Horsepower (hp) 3 10 25 40 75 100 Fan A4AXFN A6AXFN A6AXFN A6AXFN A10EFN A10EFN Fan Size in./mm 4 6 6 6 (2x) 10 10 (2x) Fan VAC 115 115 115 115 115 115 Fan Amps (50/60 Hz) .26/.21 .45/.36 .45/.36 .90/.72 .58/.70 1.16/1.
PAGE 4
Type 3R WEATHERFLO Type 3R Vented Enclosures CRITICAL PARAMETERS (UPPER TEMPERATURE LIMITS) Enclosure Heat Load Calculations Drive heat: WD = [(HP x 745.7 Watts/HP) / E M] x (1-E D) [Watts] Total heat: Estimate an additional 25% a for wire connections and other components. W T = WD x 1.25 a [Watts] Required airflow: CFM = (W T x 3.16) / (Tint - Tamb) [ft. 3 / min.] a This is an estimated factor. Further investigation is necessary to obtain actual total heat dissipated in enclosure.