Cut Sheet

MOUNTING OPTIONS SYSPEND 281-MA X SuSPENSioN SYStEM
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEHMI (HUMAN-MACHINE INTERFACE)3
Spec-00560 J
TUBES
Angled aluminum tubes provide
structural integrity and act as
conduit for equipment wiring. Tubes
attach to system components with
6 setscrews on each end of the
tube. (Setscrews are provided with
the mating system components,
not the tubes.) Setscrews allow for
easy adjustment and leveling of the
system. Setscrews are provided with
LOCTITE to seal threaded holes
and provide secure connections.
Available in 8 standard lengths
ranging from 250 mm to 2000 mm.
Tubes 750 mm and longer include
drilling template to assist with
drilling and tapping the holes when
the tube is cut to length.
BULLETIN: CS4
Catalog Number
L (mm) L (in.)
Weight (lb.)
S2MT250 250 9.84 2.8
S2MT500 500 19.68 5.4
S2MT750 750 29.53 8.2
S2MT1000 1000 39.37 11.0
S2MT1250 1250 49.21 13.7
S2MT1500 1500 59.05 16.5
S2MT1750 1750 68.90 19.3
S2MT2000 2000 78.74 22.0
TUBE ADAPTER
Use a Tube Adapter when the tube is
cut to length and it is not desirable
to drill and tap new holes in the tube.
Adapter attaches to the tube with
internal setscrews and provides
mounting holes at the end where the
tube was cut. RAL 9005 black nish.
Die-cast aluminum construction.
Includes installation instructions,
gasket and hardware for attaching to
the tube.
BULLETIN: CS4
Catalog Number Weight (lb.)
S2MTA 1.6