Cut Sheet

MOUNTING OPTIONS SYSPEND 281-MA X SuSPENSioN SYStEM
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEHMI (HUMAN-MACHINE INTERFACE)11
Spec-00560 J
VERTICAL MOTION PEDESTAL TUBES
Height-adjustable tubes allow
enclosure to be positioned at
the optimal viewing height for
different operators. Requires the
48-mm Round Tube Flange Coupling
(S2MFC48) and Adapter (S2MA48)
for attachment to Hoffman
enclosures with a 60 x 60-mm hole
pattern (i.e., required for attaching to
Concept HMI, CC2000, CC4000).
• Adjustable from 1130 mm (44.49
in.) to 1380 mm (54.33 in.) with
internal gas springs
• Four models support loads
ranging from 11 to 77 lb. (4.9 to
34.9 kg)
• Height is xed in place at any
position by locking handle
• Cables are separated from gas
springs inside the tube
• Internal strain-relief for cables
inside the tube
• Can be attached to Small Pedestal
Base, Large Pedestal Base,
Vertical Wall Joint, Wall Flange,
Rotary Base, Elbow or Rotatable
Elbow
• Aluminum construction
Tube cannot be inverted for overhead
mounting on the enclosure.
The weight of the coupling, adapter
plate, enclosure and internal
components must be factored into
the load when selecting a tube.
BULLETIN: CS4
Catalog Number
L Max.
mm/in.
L Min.
mm/in. Load Capacity
Weight (lb.)
S2M10VP22 350
13.78
100
3.94
11-22 lb. 15.5
S2M10VP37 350
13.78
100
3.94
22-37 lb. 15.5
S2M10VP57 350
13.78
100
3.94
37-57 lb. 15.5
S2M10VP77 350
13.78
100
3.94
57-77 lb. 15.5
L
39.37
1000 mm
1.18
30 mm
87955757
46 mm / 56 mm
1.81 I.D. / 2.20 O.D.
2.76
70 mm
3.54
90 mm
VERTICAL MOTION PEDESTAL TUBE LOAD CHART
40°C
30°C
20°C
Ambient Temperature
Damper Force/Total Weight
200 N (19-29 kg)
200 N (18-27.5 kg)
200 N (17-26 kg)300 N (26-35 kg)
300 N (27.5-37 kg)
300 N (29-39 kg)
100 N (5-10 kg)
100 N (5.5-10.5 kg)
100 N (6-11 kg)
150 N (10-17 kg)
150 N (10.5-18 kg)
150 N (11-19 kg)
When using a Vertical Motion Pedestal the overall system load is limited to the load capacity of the Vertical Motion Pedestal.