Cut Sheet

HMI ENCLOSURES AND ACCESSORIES PROLINE SLOPEd-FRONt HMI SyStEM aNd accESSORIES
PH 763.422.2211nVent.com/HOFFMAN HMI (HUMAN-MACHINE INTERFACE) 12
Spec-00338 I

Symmetrical Rack Angles have
through-holes in mounting surfaces
for mounting rack equipment.
Angles are 14 gauge plated steel.
Rack Angles with through-holes
accommodate either English or
metric cage nuts. Rack Angles are
furnished in pairs and comply with
ANSI/EIA RS310 rack mounting
standards.
Bulletin: P9
Catalog Number
Rack Units H (mm) H (in.) Description
Product
Weight (lb.)
PRA5tH 5 223 8.77 General Purpose Short Section 2.5
PRA7tH 7 312 12.27 Fits Front a back of 400-mm-high HMI 3.5
PRA9tH 9 401 15.77 Fits front of 500/500A and back of 700/500A 4.5
PRA13tH 13 578 22.77 Fits front of 500/500A and back of 700/500A 6.5
PRA17tH 17 756 29.77 Fits back of 700A 8.0
One unit = 1.75 inches (44.4mm).

Joining Kits permit joining two 700-mm frames while maintaining
an environmental seal. Joining Kit for Side-to-Side Applications
(PJ2FW7) ts on either side of the frame.
Top-to-frame Joining Kits permit joining two 700-mm frames while
maintaining an environmental seal. Joining Kit for Side-to-Side
Applications (PJ2FW7) ts on either side of the frame, allowing
sloped fronts to be attached to 700-mm ProLine frames or to
wall-mount kit. Kits available for one sloped front and one frame or
one 1200-mm wide sloped front on two joined frames. Kits include
gasket and mounting hardware.
Bulletin: P9
Catalog Number Description
PJ2FW7 Joins frames side-to-side under HMI Sloped fronts
PJStF6 Joins HMI sloped front to 600 x 600-mm frame
PJStF8 Joins HMI sloped front to 800 x 600-mm frame
PJStF12 Joins HMI sloped front to 1200 x 600-mm frame