Cut Sheet
HMI ENCLOSURES AND ACCESSORIES PROLINE SLOPEd-FRONt HMI SyStEM aNd accESSORIES
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEHMI (HUMAN-MACHINE INTERFACE)11
Spec-00338 I
FULL SUBPANELS
Subpanels are 12 gauge steel, have
anges on all sides and are painted
white (conductive panels are plated).
They can be mounted in ProLine
frame bases and HMI sloped fronts
at any depth in 25-mm increments
using optional grid straps. All
mounting hardware is included.
Bulletin: P20
Catalog Number
Conductive
Panel H (mm) H (in.) W (mm) W (in.)
Fits
PPF76 PPF76G 585 23.03 530 20.87 500A x 600 and 700 x 600
PPF78 PPF78G 585 23.03 730 28.74 500A x 800 and 700 x 800
PPF712 — 585 23.03 1130 44.49 500A x 1200 and 700 x 1200
PARTIAL SUBPANELS
Partial Subpanels are 12 gauge steel,
have anges on all sides and are
painted white (conductive panels
are plated). They can be positioned
vertically in .88-in. increments and
can also be positioned in ProLine
frame bases and HMI sloped fronts
at 25-mm increments using optional
grid straps. All mounting hardware is
included.
Bulletin: P20
Catalog Number
Conductive
Panel H (mm) H (in.) W (mm) W (in.)
Fits
PPP46 PPP46G 360 14.17 530 20.87 All 600-mm-wide HMIs
PPP48 PPP48G 360 14.17 730 28.74 All 800-mm-wide HMIs
PPP412 PPP412G 360 14.17 1130 44.49 All 1200-mm-wide HMIs
The Grounding Kit allows a ProLine
or ProLine G2 enclosure to be
grounded to VDE specications.
Includes six 12-gauge wires 411 mm
(16.19) long with ring terminations
and M6 mounting hardware.
Bulletin: P20
Catalog Number
Wire
Size
Length Between
Ring Terminals
mm/in.
Ring Terminal
Hole Diameter
mm/in.
PGK 12 ga. 411
16.19
7
.29