Cut Sheet

PROLINE INtERNaL COmPONENts Panel and Grid MountinG SySteM
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEmOduLaR ENCLOsuRE systEms5
Spec-00431 K
PaNEL suPPORt BRaCE
Panel Support Braces give additional
support to single- and double-bay
panels in heavy loading applications
and minimize the vibration created
by components mounted on the
panel. Braces can be installed on
existing systems without removing
the panel. Panel support braces
are furnished in pairs. Braces are
unpainted galvanized steel.
BULLETIN: P20
Catalog Number
L (mm) L (in.)
Fits Panel Width (mm)
PSB10 911 35.87 1000
PSB12 1111 43.74 1200
PSB16 1511 59.49 1600
PSB18 1711 67.36 1800
sWING-Out PaNEL
Swing-Out Panels allow a front-mounted panel to pivot out of an
enclosure frame opening. This accessory includes a white panel
and all the necessary hardware.
•
Swing-Out Panels are available for 600-, 700- and 800-mm wide
enclosures
•
Panels provide 170 degrees of rotation, with capability to hinge
from the right or left side
•
Spring-loaded pivot post allows for easy installation
•
Supports have a white nish. Hinge blocks are anodized black.
•
Quarter-turn latches are provided to secure the Swing-Out Panel
in the closed position
BULLETIN: P20
Catalog Number
H (mm) H (in.) W (mm) W (in.) Fits Frame
Fits Frame Width
PSP76 538 21.18 515 20.28 700 or taller 600
PSP146 1238 48.74 515 20.28 1400 or taller 600
PSP186 1638 64.49 515 20.28 1800 or taller 600
PSP206 1838 72.36 515 20.28 2000 or taller 600
PSP226 2038 80.24 515 20.28 2200 tall 600
PSP77 538 21.18 615 24.21 700 or taller 700
PSP147 1238 48.74 615 24.21 1400 or taller 700
PSP207 1838 72.36 615 24.21 2000 or taller 700
PSP78 538 21.18 715 28.15 700 or taller 800
PSP148 1238 48.74 715 28.15 1400 or taller 800
PSP168 1438 56.61 715 28.15 1600 or taller 800
PSP188 1638 64.49 715 28.15 1800 or taller 800
PSP208 1838 72.36 715 28.15 2000 or taller 800
PSP228 2038 80.24 715 28.15 2200 tall 800