Cut Sheet

ManualsBrandsnVent Hoffman ManualsLoad Center AccessoriesGrounding Bar System

PROLINE INtERNaL COmPONENts Panel and Grid MountinG SySteM

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEmOduLaR ENCLOsuRE systEms1

Spec-00431 K

FuLL suBPaNEL

ProLine subpanels are designed to provide maximum panel depth,

panel size and ease of installation. Full subpanels slide into the

frame on nylon glide blocks, which support the entire weight of the

subpanel.

•

All necessary mounting hardware is included

•

Subpanels are 12 gauge (2.5-mm) steel (subpanels for double-

bay enclosures 1400-mm tall or taller are 10 gauge steel), have

anges on all sides and are painted white

•

Conductive subpanels are unpainted galvanized steel

•

Subpanels can be mounted at nearly any depth in 25-mm

increments

•

Panels installed in the rearmost position in joined (ganged)

enclosures provide a continuous mounting surface without

requiring joining panels

•

Mounting hardware attaches to the top or to the sides of the

frame

•

Additional Mounting Hardware (catalog number PMKPF) is

available for applications requiring more support in the center

or bottom of the subpanel. This is required if the enclosure will

be tipped in transit or if the panel is not located at the bottom of

the enclosure on the glide blocks. In addition, 3-row grid straps

are required for installation unless the panel is in the rearmost

position.

BULLETIN: P20

Full Subpanel

Catalog Number

Material H (mm) H (in.) W (mm)

W (in.)

PPF76 Steel 585 23.03 530 20.87

PPF76G Conductive 585 23.03 530 20.87

PPF78 Steel 585 23.03 730 28.74

PPF78G Conductive 585 23.03 730 28.74

PPF712 Steel 585 23.03 1130 44.49

PPF126G Conductive 1085 42.72 530 20.87

PPF128G Conductive 1085 42.72 730 28.74

PPF1212G Conductive 1085 42.72 1130 44.49

PPF146 Steel 1285 50.59 530 20.87

PPF146G Conductive 1285 50.59 530 20.87

PPF148 Steel 1285 50.59 730 28.74

PPF148G Conductive 1285 50.59 730 28.74

PPF1412 Steel 1285 50.59 1130 44.49

PPF1412G Conductive 1285 50.59 1130 44.49

PPF166 Steel 1485 58.46 530 20.87

PPF166G Conductive 1485 58.46 530 20.87

PPF168 Steel 1485 58.46 730 28.74

PPF168G Conductive 1485 58.46 730 28.74

PPF1612 Steel 1485 58.46 1130 44.49

PPF1612G Conductive 1485 58.46 1130 44.49

PPF184G Conductive 1685 66.34 430 16.93

PPF186 Steel 1685 66.34 530 20.87

PPF186G Conductive 1685 66.34 530 20.87

PPF188 Steel 1685 66.34 730 28.74

PPF188G Conductive 1685 66.34 730 28.74

PPF1810 Steel 1685 66.34 930 36.61

PPF1810G Conductive 1685 66.34 930 36.61

PPF1812 Steel 1685 66.34 1130 44.49

PPF1812G Conductive 1685 66.34 1130 44.49

PPF1816 Steel 1685 66.34 1530 60.24

PPF1816G Plated 1685 66.34 1530 60.24

PPF1818G Conductive 1685 66.34 1730 68.11

PPF204 Steel 1885 74.21 330 13.00

PPF204G2 Conductive 1885 74.21 330 13.00

PPF206 Steel 1885 74.21 530 20.87

PPF206G Conductive 1885 74.21 530 20.87

PPF207 Steel 1885 74.21 630 24.80

PPF207G Conductive 1885 74.21 630 24.80

PPF208 Steel 1885 74.21 730 28.74

PPF208G Conductive 1885 74.21 730 28.74

PPF2010 Steel 1885 74.21 930 36.61

PPF2010G Conductive 1885 74.21 930 36.61

PPF2012 Steel 1885 74.21 1130 44.49

PPF2012G Conductive 1885 74.21 1130 44.49

PPF2016 Steel 1885 74.21 1530 60.24

PPF2016G Plated 1885 74.21 1530 60.24

PPF2018G2 Conductive 1885 74.21 1730 68.11

PPF226 Steel 2085 82.09 530 20.87

PPF226G Conductive 2085 82.09 530 20.87

PPF227 Steel 2085 82.09 630 24.80

PPF227G Conductive 2085 82.09 630 24.80

PPF228 Steel 2085 82.09 730 28.74

PPF228G Conductive 2085 82.09 730 28.74

PPF2210 Steel 2085 82.09 930 36.61

PPF2210G Conductive 2085 82.09 930 36.61

PPF2212 Steel 2085 82.09 1130 44.49

PPF2212G Conductive 2085 82.09 1130 44.49

Consult nVent HOFFMAN for delivery.

Additional Mounting Hardware

Catalog Number Description

PMKPF Additional Side Mounting Hardware (see Detail in drawing)

Summary of content (8 pages)

PAGE 1
PROLINE Internal Components Panel and Grid Mounting System FULL SUBPANEL Full Subpanel ProLine subpanels are designed to provide maximum panel depth, panel size and ease of installation. Full subpanels slide into the frame on nylon glide blocks, which support the entire weight of the subpanel. • A ll necessary mounting hardware is included • S ubpanels are 12 gauge (2.
PAGE 2
PROLINE Internal Components Panel and Grid Mounting System JOINING SUBPANEL Provides a continuous panel surface in multiple bay enclosures. The joining subpanel is inserted between full subpanels of equal height. It can be installed from front or rear. Holes for grounding and mounting hardware are provided. Finish is white. Conductive joining subpanels are unpainted galvanized steel.
PAGE 3
PROLINE Internal Components Panel and Grid Mounting System PARTIAL SUBPANEL Partial Subpanels are 12 gauge steel, have flanges on four sides and are painted white. Panels can be positioned vertically in 25mm increments and also can be positioned at any depth in 25-mm increments using the optional grid straps. Conductive subpanels are unpainted galvanized steel. All necessary mounting hardware is included.
PAGE 4
PROLINE Internal Components Panel and Grid Mounting System SIDE-MOUNT SUBPANEL Side-mounted panels can be installed on the interior sides of frames. The panel and all the hardware needed to attach the subpanels to a frame are included. Hardware is plated. Panels are 12 gauge steel with a white finish. Conductive panels are unpainted galvanized steel.
PAGE 5
PROLINE Internal Components Panel and Grid Mounting System PANEL SUPPORT BRACE Panel Support Braces give additional support to single- and double-bay panels in heavy loading applications and minimize the vibration created by components mounted on the panel. Braces can be installed on existing systems without removing the panel. Panel support braces are furnished in pairs. Braces are unpainted galvanized steel. Catalog Number PSB10 PSB12 PSB16 PSB18 L (mm) 911 1111 1511 1711 L (in.) 35.87 43.74 59.
PAGE 6
PROLINE Internal Components Panel and Grid Mounting System TRANSFORMER RAILS FEATURES • • I nstalled side-to-side in the frame for component mounting Includes four M10 clamping nuts and bolts to attach equipment to rails SPECIFICATIONS • • ails slotted to fit the integral mounting holes in the frame R All mounting hardware included FINISH Plated BULLETIN: P20 Length (mm) 534 734 1134 Catalog Number PTR6 PTR8 PTR12 Length (in.) 21.02 28.90 44.
PAGE 7
PROLINE Internal Components Panel and Grid Mounting System CENTER UPRIGHT Catalog Number PCU7 PCU14 PCU16 PCU18 PCU20 PCU22 H (mm) 625 1325 1525 1725 1925 2125 H (in.) 24.61 52.16 60.04 67.91 75.79 83.66 Fits Frame Height 700 1400 1600 1800 2000 2200 Catalog Number PGH3S7V PGH3S14V PGH3S16V PGH3S18V PGH3S20V PGH3S22V L (mm) 595 1295 1495 1695 1895 2095 L (in.) 23.43 50.98 58.86 66.73 74.61 82.
PAGE 8
PROLINE Internal Components Panel and Grid Mounting System GRID STRAPS Grid Straps are 14 gauge plated steel. They are provided with specially designed rectangular holes to allow the use of cage nuts or front-loading cage nuts. Mounting holes are provided on 25-mm centers. Grid Straps are available with either 1 row or 3 rows of holes and are furnished in pairs. Mounting hardware to attach Grid Straps to the frame or to other Grid Straps is included.