Cut Sheet

PROLINE ASSEMBLED ENCLOSURES PROLINE-PC MOduLaR ENCLOsuREs aNd aCCEssORIEs
PH 763.422.2211nVent.com/HOFFMAN MODULAR ENCLOSURE SYSTEMS 6
Spec-00439 H
PROLINEPC INTEGRATED KEYBOARD/MOUSE
SHELVES
An elastomer keyboard/mouse combination is integrated into the
keyboard shelf. The keyboard has 101 keys and the cables supplied
are compatible with USB connections. The keyboard shelf is made
of 14-gauge steel with RAL 7035 textured, light-gray, polyester
powder paint. Rear surface is gasketed to maintain both UL and CSA
integrity of the enclosure.
Bulletin: p20
Catalog Number
Material
Description
PEKBMC6 Steel Keyboard shelf with integrated keyboard and mouse
PROLINEPC 20DEGREE CONTROL COMPARTMENT
Reversible design provides 20-degree angled surface for mounting
operator controls. Smaller angle maximizes mounting space
available. The keyboard shelf is made of 14-gauge steel with RAL
7035 textured, light-gray, polyester powder paint. Screw cover on
the flat side allows easy access inside compartment. Screw cover
has foam-in-place gasketing. Compartment is gasketed around
the open rear surface to extend the UL and CSA rating to the
control compartment interior. Ground stud and mounting hardware
included.
Bulletin: p20
Catalog Number Fits Frame Width
PC20A6 600 mm
PC20A8 800 mm
PROLINEPC CONSOLET COMPARTMENT
Provides sealed compartment for
keyboard storage or protection
for controls. Hinged door allows
easy access to compartment. Door
support holds door open at 90
degrees. Two quarter-turn integral
latches are incorporated into the
front edge of steel compartment
doors. Foam-in-place gasket on
door and gasket around open rear
surface extend the UL and CSA
rating to the consolet compartment
interior. Compartment is Type 304
stainless steel or 14-gauge steel
finished with RAL 7035 textured,
light-gray, polyester powder
paint. Ground studs and mounting
hardware included.
The Flush Keylock (PSTLO) is
available as an accessory.
Bulletin: p20
Catalog Number
Material
Clear Space D
mm/in.
Fits Frame Width
PCC6 Steel 525
20.66
600 mm
PCC8 Steel 725
28.54
800 mm