Cut Sheet

PROLINE G2 EXTERNAL COMPONENTS Base accessories
PH 763.422.2211nVent.com/HOFFMAN MODULAR ENCLOSURE SOLUTIONS 12
Spec-01195 E
LEVELER KITS
The Post-type Leveler Kit allows for height adjustment at the
enclosure corners to account for uneven floors. Levelers thread
into the frame corners, and can be used with a bottom-mounted
Gland Plate or a 0-mm Solid Base; they may also be affixed to the
corner blocks of the standard Plinth Base. Levelers are plated for
indoor use, and are rated to 3000lbs (1361kg).
The Mobile Base Leveling Kit allows for height adjustments at the
corners of the Mobile Base to account for uneven floors. Levelers
are plated for indoor use, and are rated to 3000 lbs. (1361 kg).
Note: the non-locking casters of the Mobile Base have a load
bearing capacity of 1000 lbs. (453.6 kg): exercise caution if
disengaging the levelers.
Bulletin: p40
Catalog Number Description
P2ALK Post-type Leveler Kit
P2ALKMB Mobile Base Leveling Kit
/


0;

FRAME FEET
Four die-cast feet for use on the
bottom of PROLINE frames that
raise the frame 9 mm.
Bulletin: p20
Catalog Number Description
PFFM12 Frame Feet
CASTER KIT
The Plate Caster Kit consists of four polyamide casters (two locking
and two non-locking) secured to formed-steel plates painted RAL
7035. The Plate Caster hardware secures the caster at the frame
corners, and can be used with a bottom-mounted Gland Plate or
a 0-mm Solid Base; however, they do not work with Plinth Bases.
Plate Casters can also be used on joined PROLINE G2 enclosures,
with no caster swivel interference. Casters are rated to 3000 lbs.
(1361 kg).
Exercise caution when moving enclosures with casters: avoid
adverse floor conditions such as cracks, seams, displacement,
etc. Never use casters while transporting an enclosure by truck on
roadways.
Bulletin: p40
Catalog Number Description
P2ACK Plate Caster Kit















STAINLESS STEEL LEGS
Legs mount to the bottom of a solid base to elevate the enclosure 4
in. (100 mm) from the floor. The legs are made of Type 304 stainless
steel and are appropriate for hose-down applications. Mounting
hardware is included.
NOTE: These legs will not fit on the PROLINE G2 Fully-Sealed Plinth
Base.
Bulletin: p20S
Catalog Number Description
PLEGSS (4) Stainless Steel Legs