Datasheet

1EQUIPMENT PROTECTION HINGED COVER WALL-MOUNT ENCLOSURES
DESIGN WITH CONFIDENCE
SPECIFICATIONS
• Mild steel solution constructed from doors thickness
1,2 mm; 1,5 mm or 1,8 mm and body thickness 1,2 mm
or 1,5 mm
• 90 degree external formed body flange
• Seamless foam-in-place gasket
• Reversible right to left side hinged door with simple,
easy-to remove and install hinge pins
• Door opens 210 degrees
• Quarter-turn latch(es) with 3 mm double-bit insert
• Finish RAL 7035 textured light-gray polyester
powder paint.
• Grounding studs system
• Conductive panel available optionally integrated or
as an accessory
• Solution with gland plate
• Furnished hardware kit includes solid washers for
wall-mounting, key hole plugs
• Weatherproof paint available on request
• Installation instruction
Hoffman mild steel wall-mount enclosures from Pentair are
designed to house and protect electrical and electronic
components in industrial environments.
An ergonomic and aesthetic styling together with an attractive
durable light-gray finish make this solution an excellent choice
when style and functionality are important.
• All types of wall-mount enclosure have an outward
formed flange to prevent contaminants from entering
the enclosure.
• Wide range of standard catalogue items makes
this solution available fast.
GL66 SERIES MILD STEEL HINGED COVER
WALL-MOUNT ENCLOSURES
Solid hinged cover models
UL 508A listed; Type 3,4,12; File No. E61997
cUL Listed per CSA C22.2 No.94; Type 3,4,12;
File No. E61997
NEMA/EEMAC Type 4 and 12
CSA, File No. 42186: Type 4, 12, 13
IEC 60529, IP66
IEC/EN62262 IK9
INDUSTRY STANDARDS