Cut Sheet

CABLE PATHWAY Cable Runway and aCCessoRies
PH 763.422.2661nVent.com/HOFFMAN NETWORKING 10
Spec-00069 V
RACK-TO-WALL KIT
Includes one section of straight
ladder rack and everything needed
to fasten the ladder section to an
open frame rack and to the wall.
Ladder is 54-in. (1372-mm) long by
12-in. (305-mm) wide. All parts have
a black painted nish. Order open
frame rack separately.
BULLETIN: DOFR2
Catalog Number Description
E45RUBKIT Each Rack-to-Wall Kit includes one:
- LSS12BLK [54-in. (1372-mm) long] Ladder Rack*
- LWASK12BLK Wall Angle Support with j-bolts
- LRRMPBLK Rack-to-Runway Mounting Kit
- LEC End Cap Kit
* Ladder Rack is cULus Classied
RUNWAY ELEVATION KIT
Elevates ladder rack 3 or 6 in. (76
or 152 mm) above rack-to-ladder
mounting plate. Use on any width
ladder rack. Kit includes two
brackets and all mounting hardware.
Made of heavy plated steel.
BULLETIN: DCR
$
2SHQ
)UDPH
5DFN
5DFNWR5XQZD\
0RXQWLQJ3ODWH.LW
2UGHU6HSDUDWHO\

6WUDLJKW
6HFWLRQ
Catalog Number
A (in.) A (mm) Finish
Kit Qty.
LEK3 3.00 76 Plated 1
LEK3B 3.00 76 Black 1
LEK3W 3.00 76 White 1
LEK6 6.00 152 Plated 1
LEK6B 6.00 152 Black 1
LEK6W 6.00 152 White 1
LEK12 12.00 305 Plated 1
LEK12B 12.00 305 Black 1
LEK12W 12.00 305 White 1
RUNWAY OVERHEAD 12-IN. STACK KIT
Allows stacking any width of ladder
rack runways 12 in. (305 mm) above
each other. Each kit contains two
complete stacking brackets with all
necessary hardware. Use one kit at
least every 5 ft. (1.5 m). Brackets and
fasteners made of plated steel.
BULLETIN: DCR
Catalog Number
Finish Includes
Kit Qty.
LST12 Plated 2 brackets and hardware 1
LST12B Black 2 brackets and hardware 1
LST12W White 2 brackets and hardware 1