Cut Sheet

ManualsBrandsnVent Hoffman ManualsCable Tray - SplicersAdjustable Butt-Splice Kit (cULus Classified)

CABLE PATHWAY Cable Runway and aCCessoRies

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICENETWORKING1

Spec-00069 V

LADDER RACK SYSTEM

INDUSTRY STANDARDS

Painted and Plated Straight Sections:

UL/cULus Classied for Equipment Grounding and Load; File No.

E236414

Curved Sections and Splice Kits:

UL/cULus Classied for Equipment Grounding; File No. E236414

cULus Bonding & Grounding

•

Classied as suitable for an equipment ground conductor

- CSA C22.2 No. 126.1-02 Section 5.2.8 Load Destruction Test

•

Two grounding jumper kits required per each splice kit on painted

ladder rack sections

cULus Load Testing

•

Load capacity per 10 support lengths is 369.2 lb.; safety factor of

1.5X

- CSA C22.2 No. 126.1-02 Section 5.1 Electrical Continuity Test

APPLICATION

The Ladder Rack System conveniently routes cables via a modular

pathway through unused space on the oor, wall or ceiling while

keeping cables accessible for easy maintenance. A variety

of straight and curved sections are highly adaptable and can

accommodate virtually any room layout.

FEATURES

• Section cross members welded on 9-in. (229-mm) centers

• Accessory adjustable cross members

• Butt-splice kits and junction-splice kits

• Each model is boxed or bagged

SPECIFICATIONS

• Straight and curved sections made of 1-1/2-in. steel

• Sections available in 6-, 12-, 15-, 18- and 24-in. (152-, 305-, 381-,

457- and 610-mm) widths

• Steel connecting and mounting hardware

FINISH

Available in four nishes:

• ANSI 61 gray polyester powder paint

• RAL 9005 black polyester powder paint

• White powder paint

• P l a t e d

ACCESSORIES

Touch-up Paint

Summary of content (12 pages)

PAGE 1
Cable Pathway Cable Runway and Accessories LADDER RACK SYSTEM INDUSTRY STANDARDS APPLICATION Painted and Plated Straight Sections: UL/cULus Classified for Equipment Grounding and Load; File No. E236414 Curved Sections and Splice Kits: UL/cULus Classified for Equipment Grounding; File No. E236414 cULus Bonding & Grounding • Classified as suitable for an equipment ground conductor - CSA C22.2 No. 126.1-02 Section 5.2.
PAGE 2
Cable Pathway Cable Runway and Accessories LADDER RACK STRAIGHT SECTIONS cULus Classified Supports cable on straight runs. Made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) 16 gauge tubular steel with a painted or plated finish. Nominal installed length is 10 ft. (3.05 m). Each section is 9 ft. 11-1/2 in. (3.03 m) long with cross members welded at 9-in. (229-mm) intervals.
PAGE 3
Cable Pathway Cable Runway and Accessories LADDER RACK CURVED SECTIONS cULus Classified Provide a vertical change in direction. They are made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) tubular steel with a painted or plated finish. Cross members are welded on the inside (inside bends) or outside (outside bends) of the section. Connect to straight section with butt-splice kits. Designed for category 5e, 6, 6A and fiber optic cable.
PAGE 4
Cable Pathway Cable Runway and Accessories JUNCTION SPLICE KIT cULus Classified Connects two straight ladder rack sections at a 90-degree angle. Made of steel with a painted or plated finish. Each kit connects one section to another. Includes mounting hardware. Catalog Number LJSKG LJSKB LJSK LJSKW Finish Gray Black Plated White Kit Qty. 2 2 2 2 Catalog Number LAJSKG LAJSKB LAJSK LAJSKW Finish Gray Black Plated White Kit Qty. 2 2 2 2 Catalog Number LRP LRPB LRPW Finish Plated Black White Kit Qty.
PAGE 5
Cable Pathway Cable Runway and Accessories RADIUS DROP KIT Mounts over ladder rack cross member to provide bending radius when dropping cable. Includes cable spools to separate cable and all mounting hardware. Made of extruded aluminum. BULLETIN: DCR Catalog Number LRD6G LRD6BLK LRD6W LRD12G LRD12BLK LRD12W LRD15BLK LRD15W LRD18G LRD18BLK LRD18W LRD24BLK LRD24W Finish Gray Black White Gray Black White Black White Gray Black White Black White Cable Runway Width (in.) 6.00 6.00 6.00 12.00 12.00 12.00 15.
PAGE 6
Cable Pathway Cable Runway and Accessories CEILING SUPPORT KIT Supports ladder rack from ceiling. Components available separately or as a kit. Six-foot-long, 5/8-in. diameter rod is threaded for easy tension adjustment. Made of plated steel. Requires surface mounting hardware (not included).
PAGE 7
Cable Pathway Cable Runway and Accessories VERTICAL WALL BRACKET Secures ladder rack section to wall or other flat surface. Made of steel with a painted or plated finish. Requires surface mounting hardware (not included). BULLETIN: DCR Catalog Number LVWBG LVWBB LVWB LVWW Finish Gray Black Plated White Kit Qty.
PAGE 8
Cable Pathway Cable Runway and Accessories MODULAR TRIANGLE SUPPORT BRACKET KIT Secures and supports ladder rack to wall. Design features three bracket support arms that easily attach to each other with quick-release pins and fold down to ease assembly. Each model accomodates two ladder rack widths. Kit includes one modular bracket assembly, three quick-release pins and two J-bolts with washers and nuts. Bracket made of painted steel with plated hardware.
PAGE 9
Cable Pathway Cable Runway and Accessories CORNER SUPPORT BRACKET KIT Provides additional support for 90-degree ladder rack junction. Made of steel with a painted or plated finish. BULLETIN: DCR END CAP KIT Provides protective covering for ends of ladder rack. Made of black vinyl. Kit Qty. 1 1 1 1 Catalog Number LCSKG LCSKB LCSK LCSKW Catalog Number LEC Finish Gray Black Plated White Kit Qty.
PAGE 10
Cable Pathway Cable Runway and Accessories RACK-TO-WALL KIT Includes one section of straight ladder rack and everything needed to fasten the ladder section to an open frame rack and to the wall. Ladder is 54-in. (1372-mm) long by 12-in. (305-mm) wide. All parts have a black painted finish. Order open frame rack separately. Catalog Number E45RUBKIT Description Each Rack-to-Wall Kit includes one: - LSS12BLK [54-in.
PAGE 11
Cable Pathway Cable Runway and Accessories RUNWAY CENTER SUPPORT KIT Threaded rod and bracket supports center of ladder rack from ceiling. Kit includes heavy-duty ladder rack cross member, two mounting brackets, two #12-24 screws, 5/8-in. threaded rod, protected sleeve and four 5/8-in. nuts. Use one kit at least every 5 ft. (1.5 m). Made of plated steel. Catalog Number LCSK6 LCSK12 LCSK18 LCSK24 Finish Plated Plated Plated Plated Fits Cable Runway 6 12 18 24 Kit Qty.
PAGE 12
Cable Pathway Cable Runway and Accessories J-BOLT KIT Connects ladder rack to top of cabinet or to auxiliary support channel. Kit includes two J-bolts and makes one support connection. Kit components are plated steel. Includes mounting hardware. J (in.) 3.5 Catalog Number LJBK J (mm) 89 Each kit contains: (2) J-Bolts, 5/16 in. (2) Nuts, 5/16 in. (2) Washers, 5/16 in. (2) Lock Washers, 5/16 in. (1) Plate Finish Plated - BULLETIN: DCR CABLERACK Standard Product AxBxC in./mm 12.