Cut Sheet

Spec-00507 H
BUSBAR DISTRIBUTION SYSTEM 60-mm system ClassiC
PH 763.422.2211 • FAX [phone] • HOFFMANONLINE.COMEQUIPMENT PROTECTION SOLUTIONS BUSBAR SYSTEMS 6
SYSTEM COVER, 3POLE
The combination of these components provides touchsafe
protection over connection sets and terminals that mount on the
face of the busbar system. System cover provides space underneath
to accommodate these mounted components. Components need to
be cut to appropriate length.
BULLETIN: HB2
Catalog Number
Description Length (mm) Qty. UL508
cUL
HB01554 Front cover section, 3-pole.
Use only with HB01136
1100 1 • •
HB01555 Top/bottom cover section.
Use only with HB01136 or HB01137
1100 1 • •
HB01136 Set of holders (left and right) for covers sections, 3P --- 1
COVER CAP, 3POLE
Can also be used as reserve section cover. Use to cover most
connection sets.
BULLETIN: HB2
Catalog Number
Description H x W (mm) Qty. UL508
cUL
HB01539 For 12 - 30 x 5/10, Double-T
and Triple-T busbar sections
180 x 200 x 90 1 • •
HB01596 For 30 x 5/10, Double-T
and Triple-T busbar sections
228 x 200 x 90 1 • •
HB01540 For 12 30 x 5/10, Double-T
and Triple-T busbar sections
250 x 200 x 90 1 • •
HB01756 For 12-30x5/10, Double-T and
Triple-T busbar sections
135 x 200 x 90 1 •
HB01757 For 12-30x5/10, Double-T and
Triple-T busbar sections
135 x 200 x 90 1 •
COMPARTMENT SECTION
Provides additional depth to system covers and reserve section
covers that are mounted on Double-T and Triple-T profile busbars.
Sold in 1200-mm sections, they can be cut to length and mounted to
the support structure. Provide additional touchsafe protection and
prevent personnel from reaching behind the 3-pole covers where
they might come in contact with a live component.
BULLETIN: HB2
Catalog Number
Description Length (m) Depth (mm)
Qty.
HB0123612 For adjusting installation depth in
Double-T and Triple-T busbar sections
1.2 48 2
HB0123712 For adjusting installation depth in
Double-T and Triple-T busbar sections
1.2 76 2
CRITO
®
PROFILINER CONNECTION MODULE
At 20-mm wide, this cage-clamp device is the narrowest connection
method available. Use to feed or draw up to 80 A of power.
CRITO ProfiLiner is a trademark of Wöhner GmbH & Co. KG.
BULLETIN: HB2
Catalog Number
Description W x H (mm)
Current
Capacity (max.) Qty. UL508A
CSA
HB01563 AWG 16-4 20 x 200 80 A 1 • —