Cut Sheet

Spec-00507 H
BUSBAR DISTRIBUTION SYSTEM 60-mm system ClassiC
EQUIPMENT PROTECTION SOLUTIONSSUBJECT TO CHANGE WITHOUT NOTICEBUSBAR SYSTEMS5
BUSBAR SUPPORT, FOR TRIPLET BUSBAR SECTIONS
Suitable for the 1140-mm
2
Triple-T profile. Use to fasten the
busbars to a backpanel or modular enclosure system structure. The
supports also serve as bracing against the forces present during
short circuit conditions.
BULLETIN: HB2
Catalog Number
Description Qty. UL508
cUL
HB01232 3-pole, without end cover 2 • •
END COVER, FOR DOUBLET AND TRIPLET BUSBAR
SECTIONS
Insulates the ends of three rigid copper busbars installed in the
HB01231 and HB01232.
BULLETIN: HB2
Catalog Number
Description Qty. UL508
cUL
HB01234 For HB01231 and HB01232 2 • •
BUSBAR COVER, FOR INDIVIDUAL BUSBARS
(INDEPENDENT OF THE SYSTEM)
Plastic cover for standard busbar, 12 x 5 – 30 x 10, as well as
double-T and triple-T profile busbars. Provides touchsafe security
while covering unused sections of busbar that can be uncovered
during future system expansion.
BULLETIN: HB2
Catalog Number
Description Length (m) Qty. UL508
cUL
HB01244 For 12 x 5 mm,
20 x 5 mm, 30 x 5 mm
1 2 • •
HB01245 For 30 x 10 mm 1 2 • •
HB01252 For Double-T and
Triple-T busbar sections
1 1 • •
RESERVE SECTION COVER, 3POLE
Use to provide touchsafe protection of all three bars of a 60-mm
system. Cover section is sold in 1100-mm lengths and can be cut to
length. Mounts on a set of plastic brackets that clip directly to the
busbar of your system.
BULLETIN: HB2
Catalog Number
Description Length (mm) Qty. UL508
cUL
HB01025 Cover section.
Use only with HB01026.
700 1 • •
HB01026 Mount for cover
section HB01025
— 2 • •