Cut Sheet

BUSBAR DISTRIBUTION SYSTEM 60mm system ClassiC
Spec-00507 L
PH 763.422.2211 • • FAX [phone] • • PENTAIRPROTECT.COMEQUIPMENT PROTECTION BUSBAR SYSTEMS 8
CONNECTION SET, 3POLE OR 4POLE, WITHOUT
COVER
Modular design allows phase connections to be spread out along
the busbar structure. Each phase conductor can be run parallel
from the upstream or downstream device. These connection sets do
not come with a cover cap – use Cover Cap or System Cover to gain
finger-safe protection.
BULLETIN: HB2
Catalog Number
Description
W x H x D
(mm)
UL Current
Capacity
(max.)
Current
Capacity
(max.) Qty. UL508 cUL
CSA
HB01537 3-pole, Cu cables Class B acc. to UL 486E, 95 - 300 mm² / AWG 3/0 - MCM
600, for 20 x 5 - 30 x 10 and double-T and triple-T section*
153 x 184 x 115 560A 560 A 1 • • •
HB01538 3-pole, for flat busbars up to 32 x 20mm 153 x 184 x 115 800 A 1 • • •
HB01147 4-pole, Cu cables Class B acc. to UL 486E, 95 - 300 mm² / AWG 3/0 - MCM
600, for 20 x 5 - 30 x 10 and double-T and triple-T section*
204 x 224 x 115 420A 560 A 1 • • •
HB01162 4-pole, for flat busbars up to 32 x 20mm 204 x 224 x 115 800 A 1 • • •
* Not maintenance-free when aluminum conductors are used.
UNIVERSAL CONDUCTOR TERMINAL
Terminals for round American Wire Gauge (AWG) conductor are
used to either supply power to or draw power from the busbar
system. These parts must match the thickness of the busbar being
applied in your system. Cover caps are sold separately. Sold in sets
of three terminals.
BULLETIN: HB2
Catalog Number
Description
Connection
AWG (min.-max.)
Terminal Space
H x W (mm)
Current
Capacity (max.) Qty. UL508 cURus
CSA
HB01284 5-mm flat busbars 16-6 7.5 x 7.5 180 A 3 • • •
HB01285 5-mm flat busbars 12-2 10.5 x 11 270 A 3 • • •
HB01287 5-mm flat busbars 6-2/0 14 x 14 400 A 3 • • •
HB01068 5-mm flat busbars 6-250 MCM 17 x 15 440 A 3 • • •
HB01289 10-mm flat busbars 16-6 7.5 x 7.5 180 A 3 • • •
HB01290 10-mm flat busbars 12-2 10.5 x 11 270 A 3 • • •
HB01292 10-mm Double-T and Triple-T busbar sections 6-2/0 14 x 14 400 A 3 • • •
HB01203 10-mm Double-T and Triple-T busbar sections 6-250 MCM 17 x 15 440 A 3 • • •
Meets UL508 when properly installed.
CRITO
®
PROFICLIP, BRACE TERMINALS
CRITO ProfiClip is a trademark of Wöhner GmbH & Co. KG.
BULLETIN: HB2
Catalog
Number
Description Current
HB01135 For busbars 12-20 x 5-10, Cu cables Class B acc.
to UL 486E, 35 - 150 mm² / AWG 2 - MCM 300*
480 A 1 • • •
HB01319 For busbars 20 x 5 - 30 x 10, double-T and
triple-T sections, flat busbar up to 30 x 20 mm
750 A 3 • • •
HB01318 For busbars 20 x 5 - 30 x 10, double-T and
triple-T sections, Cu cables Class B acc. to UL
486E,
95 - 185 mm² / AWG 3/0 - MCM 350*
500 A 3 • • •
HB01759 For busbars 20 x 5 - 30 x 10, double-T and
triple-T sections, flat busbar up to 30 x 20 mm
800 A 3 • • •
HB01760 For busbars 20 x 5 - 30 x 10, double-T and
triple-T sections, Cu cables Class B acc. to UL
486E,
95 - 300 mm² / AWG 3/0 - MCM 600*
600 A 3 • • •
*Not maintenance-free if aluminum conductors are used
Meets UL508 when properly installed.