Cut Sheet

BUSBAR DISTRIBUTION SYSTEM panel mount Fuse Holders
Spec-00507 L
PH 763.422.2211 • • FAX [phone] • • PENTAIRPROTECT.COMEQUIPMENT PROTECTION BUSBAR SYSTEMS 20
ACCESSORIES FOR AMBUS
®
EASYSWITCH, CONNECTION BOTTOM OR TOP
Comb-type busbar is an alternative to point-to-point wiring on the
primary side of the 10x38 and Class CC fuse holders that have an
18mm pitch. It eliminates the need for a power distribution block
and wiring duct to contain the AWG wires feeding multiple fuse
blocks. Available for both 1-pole and 3-phase configurations.
AMBUS
®
EasySwitch is a trademark of Wöhner GmbH & Co. KG
BULLETIN: HB2
Catalog Number
Description Length (m) Cross Section (mm)
Rated Current/
Rated Voltage (UL) Qty.
UL508
HB31548 1-pole, insulated, 18mm pitch 1 25
100A
a
/600V
1 •
HB31549 3-pole, insulated, 18mm pitch 1 25
100A
a
/600V
1 •
a
100 ampere rated if connected from one end, 200 ampere rated if connected in the center.
Catalog Number
Description
Rated Current/
Rated Voltage (UL) Qty. UL508
cULus
HB31550 Connecting terminal AWG 10-1/0, for HB31549 115A/600V 1 • •
HB31552 End cap for 3-pole comb-type busbars HB31549 --- 2 • •
PV FUSE HOLDERS, BUSBAR COMBINED DC CURRENT
Fuse holders for mounting circuit protection devices for the wires
and cables associated with photovoltaic installations. These
devices allow the combining of current on metric dimension
busbars. The design eliminates the bending radius space
associated with large cables.
BULLETIN: HB2
Catalog Number
Width (mm) For Use With Qty. UL4248
UR
HBF31570 22.5 30A, 1000Vdc, 10x38 PV fuses, 30x5 or 30x10 busbar 1 • •
HB31570 22.5 30A, 1000Vdc, 10x38 PV fuses, 30x5 or 30x10 busbar 12 • •
HB03289 60 250A, 1500V, NH1XL PV fuses, 2x 30x10 busbar 1 • •
HB03293 81 600A, 1500V, NH2XL/NH3L PV fuses, 2x 40x10 busbar 1 • •