Datasheet

ACCESSORIES Condensation ManageMent
Spec-00542 I
EQUIPMENT PROTECTION SOLUTIONSSUBJECT TO CHANGE WITHOUT NOTICECOOLING3
H2OMIT™ THERMOELECTRIC DEHUMIDIFIER
INDUSTRY STANDARDS
UL 508A Listed; File No. E61997
cUL Listed per C22.2 No. 14; File No. E61997
CE
APPLICATION
The H2OMIT™ Thermoelectric Dehumidifier removes moisture
from the air within an enclosure, providing an inexpensive yet highly
effective way to protect electronic and electrical components from
condensation.
FEATURES
• Reduces corrosion that can limit the life of internal electrical and
electronic components
• Condenses moisture from internal enclosure air and standing
liquids
• Built-in drain provision with plastic hose directs collected
moisture to the Vent Drain (sold separately)
• Rotating side air vents direct recirculating air away from critical
controls
• Mounts via DIN rail on internal panel or mounts directly onto the
inside bottom of enclosure above the Vent Drain (sold separately)
• Can be used in mild steel, aluminum, stainless steel and non-
metallic enclosures
SPECIFICATIONS
• High-impact ABS shell
• Operates on 24-Volt DC power
• 4.5 A max. (84 W)
• Runs continuously above 32 F
a
(power supply not included)
• Removes 8 oz. of moisture in 24 hours
• Compact 6.00-in. x 5.50-in. x 5.75-in. design
• One Thermoelectric Dehumidifier includes:
- Four feet of plastic hose
- Two hose retainers
- One double-ended hose retainer
- Six inches of Velcro
®
- Seven-inch strip of DIN rail
- Two mounting screws
Must be used with UL-certified drain to remove pooled liquid from
enclosure.
a
If continual operation is not desired, a Mechanical Hygrostat (AMHUM)
can be wired to the thermoelectric dehumidifier and then set to turn the
dehumidifier on at the desired relative humidity.
VELCRO is a trademark of Velcro Industries B.V.