Datasheet

ACCESSORIES Condensation ManageMent
Spec-00542 I
EQUIPMENT PROTECTION SOLUTIONSSUBJECT TO CHANGE WITHOUT NOTICECOOLING1
Spec-00542
I
763.422.2211
763.576.3200
COOLING
Accessories
condensAtion MAnAgeMent
H2OMIT™ VENT DRAINS
INDUSTRY STANDARDS
Maintains UL/cUL Type 4, 4X rating when properly installed on a UL/cUL
Type 4 or 4X enclosure.
UL 508A Listed; Type 4, 4X; File No. E61997
cUL Listed per CSA C22.2 No 94; Type 4, 4X; File No. E61997
NEMA/EEMAC Type 4, 4X
IEC 60529, IP66
APPLICATION
H2OMIT™ Vent Drains allow accumulated water to drain out the
bottom of an enclosure. The UL-approved vent drains also function
as an air pressure equalizer, reducing the harmful effects of
temperature-induced vacuums that could pull water and moisture
into the enclosure.
FEATURES
Uses gravity to remove collected liquids
One-way mechanical shut-off when pressure is equalized
prevents water and contaminants from entering the enclosure
Helps reduce corrosion that can limit the life of internal electrical
and electronic components
Installs in a 7/8-in. hole in the bottom of enclosure with provided
nut or in a 1/2-in. NPT/NPS threaded conduit hub
Installs in the bottom of mild steel, aluminum, stainless steel or
non-metallic enclosures
Maintains enclosure’s UL Type rating when properly installed
SPECIFICATIONS
Stainless Steel Vent Drain
Corrosion-resistant polyester material with a Type 304 stainless
steel sleeve
2.00-in. long x 1.38-in outside diameter
Non-Metallic Drain Vent
Corrosion-resistant polyester material
2.00-in. long x 1.25-in. outside diameter
Performance Data H2OMIT Vent Drains
CATALOG NUMBERS
AVDR4NM AVDR4SS4
UNIT CONSTRUCTION
Description Non-metallic Vent Drain Stainless Steel Vent Drain
D (in./mm) 1.25/32 1.38/35
Quantity 1 1

Summary of content (4 pages)