Cut Sheet

FEEDTHROUGH WIREWAY StainleSS Steel Feed-through neMa type 4X WireWay
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWIRE AND CABLE MANAGEMENT3
Spec-00325 G
GASKET AND SCREWS
Standard packages of wireway contain one gasket and one set of
screws to join sections, except Tee Fittings which contain two of
each and Telescope Fittings which contain none. Additional gasket
and screw sets may be ordered by catalog number.
Bulletin: F22
Catalog Number AxB in./mm
F44WGSS 4.00 x 4.00
102 x 102
F66WGSS 6.00 x 6.00
152 x 152
90DEGREE ELBOW
Bulletin: F22
Catalog Number
AxB in./mm
F
in./mm
K
in./mm
F44WE90SS 4.00 x 4.00
102 x 102
7.00
178
5.00
127
F66WE90SS 6.00 x 6.00
152 x 152
9.00
229
6.00
152
All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints. Dimension K is
from intersection of center lines.
Certified by Canadian Standards Association.
TEE
Bulletin: F22
Catalog Number
AxB in./mm
F
in./mm
G
in./mm
K
in./mm
F44WTSS 4.00 x 4.00
102 x 102
7.00
178
10.00
254
5.00
127
F66WTSS 6.00 x 6.00
152 x 152
9.00
229
12.00
305
6.00
152
All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints. Dimension K is
from intersection of center lines.
Certified by Canadian Standards Association.
CLOSURE PLATE
Used to seal the end of a wireway section or run.
Bulletin: F22
Catalog Number
D
in./mm
E
in./mm
F44WPSS 5.38
137
5.38
137
F66WPSS 7.62
194
7.62
194
Note: All dimensions are to outside surfaces. Allow .12 in. (3mm) additional for gasket at joints.
Certified by Canadian Standards Association.