Cut Sheet

FEEDTHROUGH WIREWAY Feed-Through NeMA Type 12 WireWAy
PH 763.422.2211nVent.com/HOFFMAN WIRE AND CABLE MANAGEMENT 4
Spec-00323 L
FLEXIBLE FITTING
Isolates a wireway run from shock and vibration. Compensates
for misalignment. Used where an odd angle is required (but not to
exceed 90 degrees). Permits movement of a machine or control
station connected to a wireway run. Hypalon bellow with steel
flanges.
Bulletin: F20
Catalog Number AxB in./mm
F22WFF 2.50 x 2.50
64 x 64
F44WFF 4.00 x 4.00
102 x 102
F66WFF 6.00 x 6.00
152 x 152
F88WFF 8.00 x 8.00
203 x 203
TELESCOPE FITTING
Length is easily adjustable from 1.50 in. (38 mm) to 13.50 in. (343
mm). No cutting or welding required.
Bulletin: F20
Catalog Number AxB in./mm
F22WA 2.50 x 2.50
64 x 64
F44WA 4.00 x 4.00
102 x 102
F66WA 6.00 x 6.00
152 x 152
F88WA 8.00 x 8.00
203 x 203
All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints.
CUTOFF FITTING
For lengths up to 12.00 in. (305 mm). Shorten body to desired length
and weld on flange.
Bulletin: F20
Catalog Number AxB in./mm
F22WX 2.50 x 2.50
64 x 64
F44WX 4.00 x 4.00
102 x 102
F66WX 6.00 x 6.00
152 x 152
F88WX 8.00 x 8.00
203 x 203
All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints.
CROSS
Bulletin: F20
Catalog Number
AxB in./mm
G
in./mm
K
in./mm
F22WC 2.50 x 2.50
64 x 64
8.50
216
4.25
108
F44WC 4.00 x 4.00
102 x 102
10.00
254
5.00
127
F66WC 6.00 x 6.00
152 x 152
12.00
305
6.00
152
F88WC 8.00 x 8.00
203 x 203
14.00
356
7.00
178
All dimensions are to outside surfaces. Allow .12 in. (3 mm) additional for gasket at joints. Dimension K are
from intersection of center lines.
Certified by Canadian Standards Association.