Cut Sheet

LAYIN WIREWAY L ay-In nEMa TypE 12 WIrEWay
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEWIRE AND CABLE MANAGEMENT11
Spec-00321 J
BARRIER KITS, BRACKETMOUNTED
Spring steel brackets hold barriers in place by friction fit inside
wireway. Order barrier and bracket separately. Recommended
spacing in increments of 3 ft. (.9 m).
Bulletin: F10
Compartment Barriers

Catalog Number
Sealing Plates (qty.)
a
W (in.)
W (mm)
F44B360
1 pkg.
a
(5 pcs.)
3.00 76
F66B560
1 pkg.
a
(5 pcs.)
4.50 114
a
Package consists of five barriers.
89159486
Two-Compartment Brackets

Catalog Number
Sealing Plates (qty.)
a
W (in.)
W (mm)
F44BB2C 1 pkg. 3.00 76
F66BB2C 1 pkg. 4.50 114
a
Package consists of five brackets.
87797154
Three-Compartment Brackets
Catalog Number
Sealing Plates (qty.)
a
W (in.)
W (mm)
F44BB3C 1 pkg. 3.00 76
F66BB3C 1 pkg. 4.50 114
a
Package consists of five brackets.
90DEGREE ANGLE SEALING PLATE
When joining a lay-in section or fitting to a closure plate, a box
connector, a non-lay-in cut-off fitting or any similar non-lay-in
section or fitting, a F____LSAG 90-degree angle sealing plate is
required at each junction. Hoffman furnishes this plate with fittings.
Additional 90-degree angle sealing plates may be required in some
cases. Plate includes a flange gasket and flange screws, not shown
in drawing.
Bulletin: F10
Catalog Number AxB in./mm
F22LSAG 2.50 x 2.50
64 x 64
F44LSAG 4.00 x 4.00
102 x 102
F66LSAG 6.00 x 6.00
152 x 152
F88LSAG 8.00 x 8.00
203 x 203
F126LSAG 12.00 x 6.00
305 x 152
Each sealing plate also includes one gasket and one set of screws to join sections.
QUICKRELEASE FLAT SEALING PLATE
This exclusive Hoffman-designed hinged sealing plate permits
quick and easy access to the wireway interior without using a tool.
Bulletin: F10
Catalog Number AxB in./mm
F22LSGQR 2.50 x 2.50
64 x 64
F44LSGQR 4.00 x 4.00
102 x 102
F66LSGQR 6.00 x 6.00
152 x 152
F88LSGQR 8.00 x 8.00
203 x 203
F126LSGQR 12.00 x 6.00
305 x 152
Each sealing plate also includes one gasket and one set of screws to join sections.