Cut Sheet

OUTSIDE PLANT PRODUCTS COMLINE OSP WaLL-MOuNt CabINEt PaCk agE aNd aCCESSOrIES
PH 763.422.2661nVent.com/HOFFMAN NETWORKING 4
Spec-00215 Q
RACK ANGLES
Rack Angles are made of 12 gauge, self-grounding plated steel
and are grounded to the cabinet body through the mounting bolts.
Square mounting holes meet EIA standard.
Package includes two rack angles.
BULLETIN: DCOMY
Catalog Number
Rack Width Rack Units
Use with Cabinet (Height x Width in mm)
ERA196S 19 12 600 x 600
ERA199S 19 18 900 x 600
ERA19239S 19 or 23 18 900 x 700
ERA192312S 19 or 23 25 1200 x 700
VERTICAL POLE-MOUNT CHANNEL
Vertical Pole-Mount Channel facilitates pole-mounting the
COMLINE package. It includes the bracket and hardware to mount
the channel to the cabinet. No drilling into cabinet required to install.
BULLETIN: DCOMY
Catalog Number
Description
Use with Cabinet
EPMC6 Vertical Pole-Mount Channel 600 600-mm tall
EPMC9 Vertical Pole-Mount Channel 900 900-mm tall
EPMC12 Vertical Pole-Mount Channel 1200 1200-mm tall
WOOD PANEL
Wood Panels are made of 3/4-in. plywood, pre-cut and pre-drilled to
install on panel mounting studs in the rear of the cabinet.
BULLETIN: DCOMY
Catalog Number
Height x Width
Use with Cabinet
(Height x Width)
E60P60W 524 x 524 600 x 600
E90P60W 824 x 524 900 x 600
E90P70W 824 x 624 900 x 700
E120P70W 1124 x 624 1200 x 700
GLAND PLATE
GlandPlatesaremadeof.100-in.-thickaluminum,nishedtomatch
the cabinet. They include a factory-installed foam-in-place gasket,
stainless steel hardware and grounding provision. The installed
gland plate maintains the cabinet rating.
Package includes solid gland plate.
BULLETIN: DCOMY
Catalog Number
Description
Nominal Height x Width (P x Q)
EGPS1 Solid small 506 x 381
EGPS2 Solid large 838 x 381
EGPACT15 AC cutout for T15 506 x 381
EGPACT20 AC cutout for T20 838 x 381
EGPACCR23 AC cutout for CR23 838 x 381
EGPHX20 Heat exchanger cutout for XR20 838 x 381
EGPHX29 Heat exchanger cutout for XR29 838 x 381
XR20 and XR29 indoor use only.
PLINTH BASE
The Plinth Base enables pad mounting and provides additional cable
management space. It adds an additional 5.00-in. (127-mm) height
to the cabinet. The base is made of aluminum painted RAL 7035
light gray.
BULLETIN: DCOMY
Catalog Number
Description
Use with Cabinet
(Width x Depth)
EPL7060 Plinth base 700 x 600
GROUND BUSS
This copper Ground Buss provides wiring tie points within the
cabinet. Mounts on studs provided on cabinet side. Tie-point
spacing is 3/4-in. pair-to-pair and 5/8-in. across each pair. Ground
studs are 1/4-20 x .75-in. on 3/4-in. centers.
BULLETIN: DCOMY
Catalog Number Description
EGBB1 6-position, double-lug buss
EGBB2 12-position, double-lug buss
HANDLE OPTIONS
Handle Options can be padlocked for
added security. Kit includes handle
and mounting hardware. Install
using existing enclosure cam.
BULLETIN: A80, DCOMY
Catalog Number Description
ELHP Padlocking L-Handle
EPL4 Padlocking quarter-turn with key
DL36 Locking wing nut with 2 keys, silver nish