Cut Sheet

OUTSIDE PLANT PRODUCTS COMLINE WaLL-MOuNt ENCLOsurEs aNd aCCEssOrIEs
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICENETWORKING1
Spec-00454 H
Spec-00454
COMLINE, TYPE 4X
INDUSTRY STANDARDS
UL 508A Listed; Type 3, 3R, 4, 4X, 12; File No. E61997
CSA File No. 42186: Type 3, 3R, 4, 4X, 12
NEMA/EEMAC Type 3, 3R, 4, 4X, 12
IEC 60529, IP66
Designed to meet NEBS-Telcordia GR487, GR63, IEC 48D
Meets Type 3RX requirements
NEBS is a trademark of Telcordia
APPLICATION
Lightweight, corrosion-resistant COMLINE aluminum wall-mount
enclosures provide long-lasting protection for housing electrical
components in extreme outdoor environments. These customizable
enclosures employ a foam-in-place gasket for a tight seal and
are ideal for rooftop or tower-mounted telecommunications
applications.
FEATURES
• Foam-in-place gasket
• 1- or 3-point latching (screwdriver slot), depending on door size
• Optional door stop/wind latch holds door in place during service
• Two door/hinge styles available:
– Easily removable door with hidden hinge and retained
hinge pin. Maximum door load 50 lb. (22.7 kg)
– Heavy-duty continuous hinge door. Maximum door load
150 lb. (68.0 kg)
• Optional solar shield top
SPECIFICATIONS
• Type 5052-H32 aluminum: covers are .080-in. or .100-in. thick
depending on size; bodies are .080-in. thick
• Seams continuously welded and ground smooth for a finished
appearance
• Bonding provision on door; ground stud on body
FINISH
RAL 7035 light textured low gloss polyester powder paint over pre-
treated surfaces. Custom finishes available; please contact your
local Hoffman sales office.
ACCESSORIES
See also Accessories chapter.
Door Stop Kit
Handle Options
Mounting Panel
Pole Mounting Kit
Rack Angles
Solar Shield Top
MODIFICATION AND CUSTOMIZATION
Hoffman excels at modifying and customizing products to
your specifications. Contact your local Hoffman sales office or
distributor for complete information.
Bulletin: DcOM
Standard Product Hidden Hinge
Catalog Number
AxBxC mm AxBxC in.
Latch
Points
Door
Thickness
(mm)
Door
Thickness
(in.)
Std. Pkg. (lb.)
ECL303015 300 x 300 x 150 11.81 x 11.81 x 5.91 1 2 .08 9.0
ECL403015 400 x 300 x 150 15.75 x 11.81 x 5.91 1 2 .08 10.0
ECL404015 400 x 400 x 150 15.75 x 15.75 x 5.91 1 2 .08 12.0
ECL404020 400 x 400 x 200 15.75 x 15.75 x 7.87 1 2 .08 13.0
ECL504020 500 x 400 x 200 19.69 x 15.75 x 7.87 1 2 .08 15.0
ECL505020 500 x 500 x 200 19.69 x 19.69 x 7.87 1 2 .08 17.0
ECL605020 600 x 500 x 200 23.62 x 19.69 x 7.87 3 2.5 .10 19.0
ECL606020 600 x 600 x 200 23.62 x 23.62 x 7.87 3 2.5 .10 23.0
ECL806020 800 x 600 x 200 31.50 x 23.62 x 7.87 3 2.5 .10 27.0
ECL1006030 1000 x 600 x 300 39.37 x 23.62 x 11.81 3 2.5 .10 35.0
ECL1209030 1200 x 900 x 300 47.24 x 35.43 x 11.81 3 2.5 .10 55.0
ECL1509030 1500 x 900 x 300 59.06 x 35.43 x 11.81 3 2.5 .10 78.0
ECL1209030, ECL1209030CH, ECL1509030 and ECL1509030CH include vertical door stiffener. Additional door stop required to meet NEBS-Telcordia 487 door restrainer requirements.
All the above enclosures must have mounting feet installed to meet UL Type 3, UL Type 4 and UL Type 4X ratings.

Summary of content (4 pages)