Cut Sheet

Wall-Mount EnclosurEs FUSION G7 aNd acceSSOrIeS
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEMild stEEl9
Spec-00539 K
Horizontal sEparator
Horizontal Separator mounts onto side-mount accessory rails to
divide the FUSION G7 into separate compartments. Galvanized 1.5-
mm thick (16 gauge) steel. Mounting hardware provided.
Bulletin: A4GY
Catalog Number
Fits B x C (mm) Fits B x C (in.) W x D (mm) W x D (in.) S (mm)
S (in.)
GHS300225 300 x 225 11.81 x 8.86 255 x 148 10.04 x 5.83 100 3.94
GHS400200 400 x 200 15.75 x 7.87 355 x 123 13.98 x 4.84 75 2.95
GHS400225 400 x 225 15.75 x 8.86 355 x 148 13.98 x 5.83 100 3.94
GHS500200 500 x 200 19.68 x 7.87 455 x 123 17.91 x 4.84 75 2.95
GHS500225 500 x 225 19.68 x 8.86 455 x 148 17.91 x 5.83 100 3.94
GHS500250 500 x 250 19.68 x 9.84 455 x 173 17.91 x 6.81 125 4.92
GHS500300 500 x 300 19.68 x 11.81 455 x 223 17.91 x 8.87 175 6.89
GHS600225 600 x 225 23.62 x 8.86 555 x 148 21.85 x 5.83 100 3.94
GHS600250 600 x 250 23.62 x 9.84 555 x 173 21.85 x 6.81 125 4.92
GHS600325 600 x 325 23.62 x 12.80 555 x 248 21.85 x 9.76 200 7.78
GHS600400 600 x 400 23.62 x 15.75 555 x 323 21.85 x 12.72 275 10.83
GHS800300 800 x 300 32.50 x 11.81 755 x 223 29.72 x 8.78 175 6.89
GHS800400 800 x 400 32.50 x 15.75 755 x 323 29.72 x 12.72 275 10.83
GHS900325 900 x 325 35.43 x 12.50 855 x 248 33.66 x 9.76 200 7.87
GHS900425 900 x 425 35.43 x 16.73 855 x 348 33.66 x 13.70 300 11.81
padlock insErts
PadlockInsertstintostandardquarter-turnlatchesinboth
FUSION G7 and CONCEPT enclosures. They are made of black
composite material (PBT) with zinc insert and replace the standard
3-mmdouble-bitinsertwhenpadlockingsecurityisrequired.
Available with 3-mm double bit or slotted screwdriver tool to open.
Accommodate up to 5/16-in. diameter padlock shank.
Bulletin: A4GY
29 mm
1.15
36 mm
1.40
89000896
Catalog Number Description
GPDlOCK3MM 3-mm double-bit padlock insert
GPDlOCKSlOt Slotted screwdriver padlock insert