Cut Sheet

Wall-Mount EnclosurEs FUSION G7 aNd acceSSOrIeS
PH 763.422.2211nVent.com/HOFFMAN Mild stEEl 4
Spec-00539 K
Gland platE
Constructed of 1.5-mm thick (16 gauge) steel and designed for use
with FUSION G7 enclosures. Provides a removable cable egress and
entry plate while maintaining IP/UL/CSA integrity of the enclosure.
RAL7035textured,light-graypolyesterpowderpaintnish.Foam-
in-place gasket, fasteners and instructions provided. Maintains
IP66/UL/CSA Type 4 and 12 when properly installed on a Hoffman
enclosure.
Bulletin: A4GY
Catalog Number
Cutout Size (mm) Cutout Size (in.) W x H (mm)
W x H (in.)
GGP90180 90 x 180 3.54 x 7.09 165 x 255 6.50 x 10.04
GGP90280 90 x 280 3.54 x 11.02 165 x 355 6.50 x 13.98
GGP150180 150 x 180 5.91 x 7.09 225 x 255 8.86 x 10.04
GGP150280 150 x 280 5.91 x 11.02 225 x 355 8.86 x 13.98
Front and Back VErtical accEssory MountinG
rails
Constructed of galvanized steel. Front rail is 2.0-mm thick (14
gauge) and back rail is 1.5-mm thick (16 gauge). Package includes
two front and two back rails and mounting screws.
Required for side-mount and adjustable-depth accessory
installation.
Bulletin: A4GY
10 mm
.39
4 mm
.17
25 mm
.98
Back Rail
5 mm
.20
25 mm
.98
Front Rail
89000891
Catalog Number
Fits A (mm)
Fits A (in.)
GAMR300 300 11.81
GAMR400 400 15.75
GAMR500 500 19.68
GAMR600 600 23.62
GAMR700 700 27.56
GAMR800 800 31.50
GAMR1000 1000 39.37
GAMR1200 1200 47.24
GAMR1500 1500 59.05