Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresMounting Bracket Kit, (4) Brackets per Kit, Steel/Zinc

Wall-Mount EnclosurEs FUSION G7 aNd acceSSOrIeS

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEMild stEEl1

Spec-00539 K

Fusion G7, typE 4 and 12

industry standards

Wall-mounting brackets required to maintain UL/CSA external

mounting requirement.

UL 508A Listed; Type 4, 12; File No. 61997

cUL Listed per CSA C22.2 No. 94; Type 4, 12; File No. 61997

NEMA/EEMAC Type 4, 12, 13

CSA File No. 42186: Type 4, 12

IEC 60529, IP66

application

Innovative, metric-dimensioned wall-mount enclosure designed to

house and protect electrical and electronic components in industrial

environments. Provides traditional enclosure functionality with

scalable internal component mounting capability using the optional

internal mounting system and accessory components.

spEciFications

•

1.2-mm (18 gauge), 1.5-mm (16 gauge) and 1.9-mm (14 gauge)

steel

•

Seamless foam-in-place gasket

•

Reversible door with sealed hinges and hinge brackets

•

Gland plate(s) for enclosure bottom

•

Bonding provision on door; grounding studs (2) on body

•

Full-height galvanized steel back panel included

•

Externalformed90-degreebodyangechannelsawayliquids

•

Three-point latching on enclosures 1000-mm high and taller

•

Door alignment device on doors with 3-point latching and 800

mm or wider

• Pre-cut gland plate opening(s) in enclosure bottom

• Quarter-turn latch(es) with 3-mm double-bit insert

• Corner-formed door

• Simple, easy-to-remove and install hinge pins with captivation clip

• High-torquethreadlessstudsandfastenersondoor

• Wide assortment of user-friendly internal accessories to increase

internalmountingareacapabilityanddesignexibility

• Hardware kit includes grounding and sealing hardware

• Hinged on right side

• Installation instruction provided

FinisH

RAL 7035 textured, light-gray polyester powder paint inside and out.

Panel is galvanized.

accEssoriEs

Gland Plate

Full-Height Back Panel

Half-Height Back Panel

Half-Height Side Panel

Side-Mount Accessory Rail

Front and Back Vertical Accessory Mounting Rails

Handles

Aluminum Swing Panel

FUSION G7 Door Stop Kit

Bulletin: A4G

Summary of content (14 pages)

PAGE 1
Wall-Mount Enclosures FUSION G7 and Accessories FUSION G7, Type 4 and 12 INDUSTRY STANDARDS • Wall-mounting brackets required to maintain UL/CSA external mounting requirement. UL 508A Listed; Type 4, 12; File No. 61997 cUL Listed per CSA C22.2 No. 94; Type 4, 12; File No. 61997 NEMA/EEMAC Type 4, 12, 13 CSA File No.
PAGE 2
Wall-Mount Enclosures FUSION G7 and Accessories Standard Product Catalog Number G300300225G G300400200G G400300150 G400300225G G400400225G G400600225G G500400225G G500500225G G500500300G G600400225G G600500200G G600500300G G600600225G G600600325G G600600400G G600800300G G700500250G G800600225G G800600325G G800600425G G800800225G G800800300G G1000600250G G1000800300G G1000800400G G1200800300G G1200800400G G1200900325G G1500900325G G1500900425G AxBxC mm/in. 300 x 300 x 225 11.81 x 11.81 x 8.
PAGE 3
Wall-Mount Enclosures FUSION G7 and Accessories 19 mm .75 B B - 40 mm 1.57 (Body Opening) C 20 mm .80 13 mm .50 19 mm .75 Y H Panel 3 mm .10 (4X) J A - 41 mm 1.60 (Door Clear Space) A - 2J (When 2 latches are used) 41 mm 1.59 A G Omit Middle Studs if A<762 mm 30.00 D M8 X 1.25-6G Collar Stud Door Bonding Provision Y 54 mm 2.12 53 mm 2.08 19 mm .75 25 mm 1.00 Omit Middle Studs if B<788 mm 31.00 21 mm .89 13 mm .51 13 mm .51 26 mm 1.02 25 mm 1.00 P 23 mm .89 E A - 40 mm 1.
PAGE 4
Wall-Mount Enclosures FUSION G7 and Accessories Gland Plate Constructed of 1.5-mm thick (16 gauge) steel and designed for use with FUSION G7 enclosures. Provides a removable cable egress and entry plate while maintaining IP/UL/CSA integrity of the enclosure. RAL 7035 textured, light-gray polyester powder paint finish. Foamin-place gasket, fasteners and instructions provided. Maintains IP66/UL/CSA Type 4 and 12 when properly installed on a Hoffman enclosure.
PAGE 5
Wall-Mount Enclosures FUSION G7 and Accessories Full-Height Back Panel Galvanized steel full-height panels. See table for thickness. M8 panel mounting nuts provided with 50-mm front-to-back sidemount accessory rails and side-mount accessory rail brackets. Bulletin: A4GY Catalog Number G300P300 G400P300 D x E (mm) 255 x 255 355 x 255 D x E (in.) 10.04 x 10.04 13.98 x 10.04 Thickness (mm) 1.5 1.5 Thickness (Gauge) 16 16 G400P400 G500P400 G600P400 355 x 355 455 x 355 555 x 355 13.98 x 13.98 17.
PAGE 6
Wall-Mount Enclosures FUSION G7 and Accessories Half-Height Back Panel Galvanized steel half-height back panels. See table for thickness. M8 panel mounting nuts provided with 50-mm front-to-back sidemount accessory rails and side-mount accessory rail brackets. Bulletin: A4GY Catalog Number G300P300H G300P400H G400P300H G400P400H G400P600H G500P400H G500P500H G600P400H G600P500H G600P600H G600P800H G700P500H G800P600H G800P800H G1000P600H G1000P800H G1200P800H G1200P900H G1500P900H nVent.
PAGE 7
Wall-Mount Enclosures FUSION G7 and Accessories Full-Height Side Panel Galvanized steel full-height side panels. Panel mounting hardware is furnished with the panel. See table for thickness.
PAGE 8
Wall-Mount Enclosures FUSION G7 and Accessories Half-Height Side Panel Galvanized steel half-height side panels are 1.5-mm thick (16 gauge). Panel mounting hardware is furnished with the panel.
PAGE 9
Wall-Mount Enclosures FUSION G7 and Accessories Horizontal Separator Horizontal Separator mounts onto side-mount accessory rails to divide the FUSION G7 into separate compartments. Galvanized 1.5mm thick (16 gauge) steel. Mounting hardware provided.
PAGE 10
Wall-Mount Enclosures FUSION G7 and Accessories Padlock Handles 48 mm 1.89 115 mm 4.51 This black, composite, padlocking handle with zinc insert can replace the standard quarter-turn, 3-mm double bit insert on FUSION G7 and CONCEPT wall-mount enclosures. It accommodates up to a 5/16-in. diameter padlock shank and can be converted from clockwise to counterclockwise opening. Maintains IP66 and UL/CSA Type 12, 4 and 4X when properly installed in a Hoffman CONCEPT and FUSION G7 enclosure.
PAGE 11
Wall-Mount Enclosures FUSION G7 and Accessories 100-mm Plinth Base Install 100-mm Plinth Base under FUSION G7 enclosure to provide space for cables to enter from below. Constructed of 1.5-mm thick (16 gauge) steel sides and 2.5-mm thick (12 gauge) corners with textured RAL 9005 black finish. Mounting hardware included with base. Bulletin: A4GY Catalog Number GPB800300 GPB800400 GPB900325 GPB900425 Fits B x C (mm) 800 x 300 800 x 400 900 x 325 900 x 425 Fits B x C (in.) 31.50 x 11.81 31.50 x 15.75 35.
PAGE 12
Wall-Mount Enclosures FUSION G7 and Accessories Screw Package 5-mm screws for FUSION G7 internal accessories. Package of 20. Bulletin: A4GY Description 5-mm screw M5 x 0.8 x 10 Catalog Number GSM5 Panel Mounting Brackets Pkg. Qty. 20 Package includes four mounting brackets, four M8 nuts and eight 5-mm screws. Bulletin: A4GY Catalog Number GSMRBKTS Description Panel mounting brackets; fit side-mount accessory rails Full-Width Top and Bottom Mounting-Bracket Kits with Studs L 17 mm .67 S 39 mm 1.
PAGE 13
Wall-Mount Enclosures FUSION G7 and Accessories FUSION G7 Door Stop Kit Designed for use on FUSION G7 enclosures to secure the door in the open position. Door Stop Kit can be mounted at the top or bottom of the door opening, as well as left- or right-hinged. Door stop is stainless steel with plated and stainless steel mounting hardware. Maintains IP66 and UL/CSA Type 4 and 12 when properly installed in a Hoffman FUSION G7 enclosure.
PAGE 14
Wall-Mount Enclosures FUSION G7 and Accessories VELCRO® Cable Wrap Securely holds cable to cable manager and unfastens easily for cable maintenance. VELCRO ® is 0.5-in. (12.7-mm) wide. Available in 8- and 12-in. (203- and 305-mm) lengths in both screw fastener and wrap styles. M5 self-tapping screw is used on Net Series or PROLINE frames. VELCRO is a trademark of Velcro Industries B.V. Bulletin: DACCY Catalog Number ECWTD8B ECWTD12B ECW8B ECW8R ECW8BL ECW8Y ECW12B ECW12R ECW12BL ECW12Y nVent.