Cut Sheet
WALLMOUNT PREFERREDCUTOUT DISCONNECTS CONCEPT Wall-MOuNT DisCONNECTs
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEDISCONNECT3
Spec-00146 P
DISCONNECT MOUNTING SPACE
Disconnects will occupy space on panel shown by dimensions E1, F1
and G1. Wiring space W1 is available when disconnect is installed in
the enclosure.
E1 = 4.75 in. (121 mm) when C = 8.00 in. (203 mm)
E1 = 11.62 in. (294 mm) when C = 12.00 in. (305 mm)
E1 = 11.62 in. (294 mm) when C = 16.00 in. (406 mm)
W1 = Wiring Space.
See Technical Information for wire bend space.
Refer to
NATIONAL ELECTRICAL CODE, 2005 article 430-10(b) for
wiring space required for line side conductors to be connected to
disconnect.
Verify your application to determine whether wiring space is
adequate.
Consult Space Occupied by Disconnect drawing to determine whether
the disconnect device you are using will fit the enclosure size you have
selected.
Consult disconnect
manufacturer for F1
and G1 dimensions.