Cut Sheet

HMI ENCLOSURES AND ACCESSORIES Con solets

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEHMI (HUMANMACHINE INTERFACE)1

Spec-00356 H

Spec-00356

MILD STEEL CONSOLETS

INDUSTRY STANDARDS

UL 508A Listed; Type 12, 13; File No. E61997

cUL Listed per CSA C22.2 No. 94; Type 12, 13; File No. E61997

NEMA/EEMAC Type 12, 13

CSA File Number 42186: Type 12

IEC 60529, IP65

APPLICATION

Consolets are ideal for mounting small control or instrumentation

devices where the desirable access requires a 30- or 60-degree

surface. These enclosures can be mounted on either of two sides

for placement on desktops, pedestals or other flat surfaces.

SPECIFICATIONS

• 14 gauge steel

• Seams continuously welded and ground smooth; no holes or

knockouts

• Captivated cover screws thread into sealed wells

• Bonding provision on cover

• Oil-resistant gasket and adhesive

• Control panel attached with continuous hinge along bottom edge

FINISH

ANSI 61 gray polyester powder paint inside and out over pretreated

surfaces.

ACCESSORIES

PAGE 1
HMI Enclosures and Accessories Consolets Spec-00356 Mild Steel Consolets APPLICATION Consolets are ideal for mounting small control or instrumentation devices where the desirable access requires a 30- or 60-degree surface. These enclosures can be mounted on either of two sides for placement on desktops, pedestals or other flat surfaces.
PAGE 2
HMI Enclosures and Accessories Consolets Standard Product Pedestal Columns and Bases for Consolets Catalog Number A44CCOL A66CCOL A18SBASE A24SBASE nVent.com/HOFFMAN AxBxC in./mm 35.00 x 4.00 x 4.00 889 x 102 x 102 35.00 x 6.00 x 6.00 889 x 152 x 152 18.00 x 18.00 457 x 457 24.00 x 24.00 610 x 610 PH 763.422.