Cut Sheet

MOUNTING OPTIONS Pedestals and Pedestal accessories
PH 763.422.2211nVent.com/HOFFMAN HMI (HUMAN-MACHINE INTERFACE) 6
Spec-00485 M
ANGLE ADAPTER
Angle Adapter ts top of pedestal
and provides a xed tilt of 15
degrees from horizontal for
enclosure mounting. Angle Adapter
is aluminum with large cable
opening and has clear anodized
aluminum nish. Mounting hardware
is included.
Bulletin: P1
Catalog Number Fits
AAA1544 4 x 4 pedestal
AAA1588 8 x 8 pedestal
HANDLES
Handles attach to sides, top or bottom of sloped front to provide
maximum operator control when using the suspension system,
swivel or swivel tilt. Location dimples on the sides of sloped fronts
indicate drill-hole location for standard mounting. Handles attach
inside enclosure.
Bulletin: P1
Catalog Number
Description
Fits
PuHK (2) die-cast aluminum handles (9.75 in./248 mm) PROLINE Sloped-Fronts
PuHKA (2) tubular steel handles with soft coating (9.75 in./248 mm) PROLINE Sloped-Fronts
PEDESTAL CASTER KITS
Casters can be used on pedestals in limited applications. They are
attached to the die-cast legs of steel Pedestals. Four dual-wheel
casters replace furnished levelers.
Bulletin: C1, DeC1
Catalog Number
Description
Number
of Casters Height (in.) Height (mm)
Wheel
Dia. (in.)
Wheel
Dia. (mm)
Load
Rating Ea. (lb.)
Load
Rating Ea. (kg)
AC4M6SV Casters, swivel type with brakes 2 3.72 94 3.00 76 210 95
AC4M6St Casters, stationary type 2 3.72 94 3.00 76 210 95
Two sets of AC4M6SV and AC4M6ST casters are required.
Height columns show height of caster when installed.
STAINLESS STEEL LEGS
Legs mount to the bottom of a solid base to elevate the enclosure 4
in. (100 mm) from the oor. The legs are made of Type 304 stainless
steel and are appropriate for hose-down applications. Mounting
hardware is included.
NOTE:
These legs will not t on the ProLine G2 Fully-Sealed Plinth
Base.
Bulletin: P20S
Catalog Number Description
PleGSS (4) Stainless Steel Legs