Cut Sheet

MOUNTING OPTIONS Pedestals and Pedestal accessories
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEHMI (HUMAN-MACHINE INTERFACE)5
Spec-00485 M
SWIVEL TILT
The use of a combination swivel and tilt mechanism allows a
machine operator to rotate and also tilt an HMI enclosure for
optimum viewing and safe operation. The Swivel Tilt is designed
for use between the bottom of an HMI enclosure and a pedestal
(enclosure reinforcement may be required).
Do not use the Swivel Tilt between an overhead support and an
enclosure.
The swivel feature allows maximum rotation of 350 degrees.
Integral stops are provided at 30-degree increments between 60
degrees and 180 degrees of rotation. Swivel can be locked in any
position. Tilt feature allows forward and backward movement
up to 30 degrees from horizontal. Tilt lock has a large release
knob that allows quick incremental adjustment. Top and bottom
anges allow easy installation on pedestals. A large center opening
accommodates control cables that have attached plugs. Swivel Tilt
is cast aluminum with an anodized nish. Mounting hardware and
gaskets are furnished.
Bulletin: P1
Catalog
Number
AxBxC mm/in.
Maximum
Enclosure
Size A x B x C
mm/in.
Maximum Load
Including Enclosure
(kg)
Maximum Load
Including Enclosure
(lb.)
ASt44 148 x 102 x 102
5.81 x 4.00
x 4.00
610 x 610 x 406
24.00 x 24.00 x
16.00
34.0 75
ASt88 203 x 203 x 203
8.00 x 8.00
x 8.00
838 x 610 x 610
33.0 x 24.00 x 24.00
68.0 150
The loads listed assume that the additional load is centered on the front or back of the enclosure. Please contact
Hoffman for specic application information.
SWIVEL
A swivel mechanism can be used to provide a machine operator a
way to easily rotate an operator interface enclosure to a convenient
operating position. Maximum rotation is 350 degrees. The low-
prole swivel has a large center opening in addition to a large,
wobble-free bearing surface. Swivel mechanism can be locked in
any position. The swivel mechanism is designed for use between
the bottom of an operator interface enclosure and a pedestal.
Do not use the Swivel between an overhead support and an
enclosure.
The Swivel is cast aluminum with an anodized nish. Mounting
hardware and gaskets are furnished.
Integral stops are provided at 30-degree increments between 60
degrees and 180 degrees of rotation on catalog number ASWV88
only.
Bulletin: P1
Catalog
Number
AxBxC mm/in.
Maximum
Enclosure
Size A x B x C
mm/in.
Maximum Load
Including Enclosure
(kg)
Maximum Load
Including Enclosure
(lb.)
ASWV44 27 x 102 x 102
1.06 x 4.00
x 4.00
610 x 610 x 406
24.00 x 24.00 x
16.00
45.4 100
ASWV88 33 x 203 x 203
1.28 x 8.00
x 8.00
838 x 610 x 610
33.00 x 24.00 x
24.00
90.7 200
The loads listed assume that the additional load is centered on the front or back of the enclosure. Please contact
Hoffman for specic application information.