Cut Sheet

MOUNTING OPTIONS Pedestals and Pedestal accessories
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEHMI (HUMAN-MACHINE INTERFACE)3
Spec-00485 M
BOLT-DOWN PEDESTAL
Bolt-Down Pedestal is available in
two heights. The vertical tube has
rigid one-piece construction. Rigid
cast aluminum base anges bolt
to the vertical tube. Pedestal has
ANSI 61 medium-gray or RAL 7035
textured light-gray polyester powder
paint nish. Tapped mounting
holes in the top of pedestal allow
attachment to operator interface
base with cutout, swivel, swivel tilt or
angle adapter. Hardware and gasket
to attach enclosure are included.
• Use 4.00 x 4.00-in. (102 x 102-
mm) pedestal with CONCEPT HMI
and INLINE HMI Enclosures
• Use 8.00 x 8.00-in. (203 x 203-
mm) pedestal with PROLINE
Sloped-Front Enclosures
Bulletin: P1
Catalog Number
AxBxC mm/in. Finish Description
D
mm/in.
E
mm/in.
AP23B44 584 x 102 x 102
23.00 x 4.00 x 4.00
ANSI 61 Steel 159
6.26
133
5.25
AP23B44lG 584 x 102 x 102
23.00 x 4.00 x 4.00
RAL 7035 Steel 159
6.26
133
5.25
AP33B44 838 x 102 x 102
33.00 x 4.00 x 4.00
ANSI 61 Steel 159
6.26
133
5.25
AP33B44lG 838 x 102 x 102
33.00 x 4.00 x 4.00
RAL 7035 Steel 159
6.26
133
5.25
AP23B88 584 x 203 x 203
23.00 x 8.00 x 8.00
ANSI 61 Steel 260
10.25
235
9.25
AP23B88lG 584 x 203 x 203
23.00 x 8.00 x 8.00
RAL 7035 Steel 260
10.25
235
9.25
AP33B88 838 x 203 x 203
33.00 x 8.00 x 8.00
ANSI 61 Steel 260
10.25
235
9.25
AP33B88lG 838 x 203 x 203
33.00 x 8.00 x 8.00
RAL 7035 Steel 260
10.25
235
9.25
EXTENSION
Pedestal Extension can be used with
pedestals to provide additional 6
in. (152 mm) of height for standing
position. ANSI 61 medium-gray
polyester powder paint or RAL 7035
textured light-gray polyester powder
paint.
Bulletin: P1
Catalog Number
AxBxC in./mm Finish
Description
APe688 6.00 x 8.00 x 8.00
152 x 203 x 203
ANSI 61 Steel
APe688lG 6.00 x 8.00 x 8.00
152 x 203 x 203
RAL 7035 Steel