Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresSwivel Tilt, for 4 x 4" Pedestal

MOUNTING OPTIONS Pedestals and Pedestal accessories

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEHMI (HUMAN-MACHINE INTERFACE)1

Spec-00485 M

PEDESTALS

Pedestals enable many types of enclosures and boxes to be oor

mounted. Four columns and two bases are available. Columns can

be mounted on either base, through the vertical column or directly to

the enclosure. A cutout must be made in the enclosure if the wires

are to come through the column.

Columns have anges at each end and a gasketed access plate.

Screws, oil-resistant gaskets and box connector tting are

furnished with each column for joining an enclosure to the top of

the column. Columns are 14 gauge steel with 10 gauge anges.

18.00 x 18.00-in. (457 x 457-mm) base is .19-in. (5-mm) steel and

24.00 x 24.00-in. (610 x 610-mm) base is .25-in. (6-mm) steel. Both

bases have leveling screws and holes for bolting to the oor. Finish

on bases and columns is ANSI 61 gray polyester powder coating

over pretreated surfaces. Bases and columns must be ordered

separately.

The user would normally remove the mounting brackets from the

enclosure if the enclosure is mounted on a pedestal. Hoffman can

supply enclosures without mounting brackets and with cutouts.

Consult Hoffman for more information.

Bulletin: P1

Catalog Number

AxBxC mm/in. Description

mm/in.

A44CCOl 889 x 102 x 102

35.00 x 4.00 x 4.00

Straight Pedestal Column —

—

3.75

2.75

—

184

7.25

152

6.00

—

A44PBCOl 1041 x 102 x 102

41.00 x 4.00 x 4.00

Angled Pedestal Column —

—

3.75

2.75

—

184

7.25

152

6.00

—

2.75

2.06

A66CCOl 889 x 152 x 152

35.00 x 6.00 x 6.00

Straight Pedestal Column —

—

146

5.75

121

4.75

—

203

8.00

171

6.75

—

A66PBCOl 1041 x 152 x 152

41.00 x 6.00 x 6.00

Angled Pedestal Column —

—

146

5.75

121

4.75

—

203

8.00

171

6.75

—

2.88

1.12

A18SBASe 457 x 457

18.00 x 18.00

Pedestal Base 457

18.00

—

1.00

—

.62

—

A24SBASe 610 x 610

24.00 x 24.00

Pedestal Base 610

24.00

—

1.12

—

.69

—

Summary of content (6 pages)

PAGE 1
Mounting Options Pedestals and Pedestal Accessories Pedestals Pedestals enable many types of enclosures and boxes to be floor mounted. Four columns and two bases are available. Columns can be mounted on either base, through the vertical column or directly to the enclosure. A cutout must be made in the enclosure if the wires are to come through the column. Columns have flanges at each end and a gasketed access plate.
PAGE 2
Mounting Options Pedestals and Pedestal Accessories Pedestal with Legs Pedestal is available in two heights. Vertical tube has rigid one-piece construction. Bottom of tube is open. Four sturdy, die-cast legs bolt to vertical tube. Legs have holes for bolting pedestal to the floor. Legs will accept casters in limited applications. Heavy-duty black polymer caps fit on ends of legs to cover bolts or levelers. Pedestal has ANSI 61 medium-gray or RAL 7035 textured light-gray polyester powder paint finish.
PAGE 3
Mounting Options Pedestals and Pedestal Accessories Bolt-Down Pedestal Bolt-Down Pedestal is available in two heights. The vertical tube has rigid one-piece construction. Rigid cast aluminum base flanges bolt to the vertical tube. Pedestal has ANSI 61 medium-gray or RAL 7035 textured light-gray polyester powder paint finish. Tapped mounting holes in the top of pedestal allow attachment to operator interface base with cutout, swivel, swivel tilt or angle adapter.
PAGE 4
Mounting Options Pedestals and Pedestal Accessories Stainless Steel Pedestal Pedestal is 36-in. (914-mm) tall and provides optimal viewing and operating height. Tube is 14 gauge Type 304 one-piece construction. Legs are 7 gauge Type 304 for rigidity. Cable access plate and leg levelers are included. Leg levelers can be removed for anchoring pedestal to floor. Pedestal has smooth vertical brushed finish. Pedestal will accept pedestal accessories that are not stainless steel.
PAGE 5
Mounting Options Pedestals and Pedestal Accessories Swivel Tilt The use of a combination swivel and tilt mechanism allows a machine operator to rotate and also tilt an HMI enclosure for optimum viewing and safe operation. The Swivel Tilt is designed for use between the bottom of an HMI enclosure and a pedestal (enclosure reinforcement may be required). Do not use the Swivel Tilt between an overhead support and an enclosure. The swivel feature allows maximum rotation of 350 degrees.
PAGE 6
Mounting Options Pedestals and Pedestal Accessories Angle Adapter Angle Adapter fits top of pedestal and provides a fixed tilt of 15 degrees from horizontal for enclosure mounting. Angle Adapter is aluminum with large cable opening and has clear anodized aluminum finish. Mounting hardware is included.