Cut Sheet

ManualsBrandsnVent Hoffman ManualsBlanking PlugsHole Sealer , Stainless Steel, Metallic, IP66

Spec-00182 D

HOLE SEALS Hole SealS

EQUIPMENT PROTECTION SOLUTIONSSUBJECT TO CHANGE WITHOUT NOTICEACCESSORIES1

Spec-00182

763.422.2211

763.422.2600

ACCESSO RIES

Hole SealS

HOLSEALERS™ HOLE SEALS

INDUSTRY STANDARDS

Steel Hole Seals

UL 508A Component Recognized; Type 3R, 4, 12, 13; File No.

E61997

CSA File No. 42186; Type 3R, 4, 12, 13

NEMA/EEMAC Type 3R, 4, 12, 13

IEC 60529, IP66

Stainless Steel Hole Seals

UL 508A Component Recognized; Type 3R, 4, 4X, 12, 13; File No.

E61997

CSA File No. 42186; Type 3R, 4, 4X, 12, 13

NEMA/EEMAC Type 3R, 4, 4X, 12, 13

IEC 60529, IP66

APPLICATION

Seal extra pushbutton holes, conduit openings and knockout

openings against dust, dirt, oil and water with Hoffman HOL-

SEALERS™ . Seals will cover any size or shape of hole from .19-in.

diameter to maximum diameter shown in table. Can be used on

enclosure walls up to .31-in. (8-mm) thick.

FEATURES

• Available in multiple colors and sizes

• Oil-resistant gasket provided

SPECIFICATIONS

Steel Models

• 16 gauge galvanized steel backplate

• Plated stud (10-32x5/8) and wing nut

Stainless Steel Models

• 16 gauge stainless steel backplate

• Seal, backplate, stud (10-24x5/8) and wing nut are 300 series

stainless steel

FINISH

Steel seals have polyester powder paint finish over galvanized front

surface.

Stainless steel seals have polished front surface.

Bulletin: A80HS

Summary of content (4 pages)

PAGE 1
Hole Seals Hole Seals Accessories Hole Seals Hole Seals Spec-00182 D 763.422.2211 763.422.2600 HOL-SEALERS™ Hole Seals INDUSTRY STANDARDS APPLICATION Steel Hole Seals UL 508A Component Recognized; Type 3R, 4, 12, 13; File No. E61997 CSA File No. 42186; Type 3R, 4, 12, 13 NEMA/EEMAC Type 3R, 4, 12, 13 IEC 60529, IP66 FEATURES • • Stainless Steel Hole Seals UL 508A Component Recognized; Type 3R, 4, 4X, 12, 13; File No. E61997 CSA File No.
PAGE 2
Hole Seals Hole Seals Standard Product Catalog Number AS056M Material Steel Finish/Color ANSI 61 gray For Micro AS056MSS Stainless Steel Stainless Steel Micro AS056CB Steel Chrysler beige Micro AS056MFB Steel Ford brown Micro AS056MLG Steel Light gray Micro ASPBG Steel ANSI 61 gray 22.5-mm pushbutton holes ASPBGSS Stainless Steel Stainless Steel 22.5-mm pushbutton holes AS050 Steel ANSI 61 gray 1/2-in. conduit holes AS050LG Steel Light gray 1/2-in.
PAGE 3
Hole Seals Hole Seals HOL-SEALERS™ Non-Metallic Hole Seals INDUSTRY STANDARDS FEATURES UL 508A Component Recognized; Type 3R, 4, 4X, 12, 13; File No. E61997 CSA File No. 42186: Type 3R, 4, 4X, 12, 13 NEMA/EEMAC Type 3R, 4, 4X, 12, 13 IEC 60529, IP66 • • • APPLICATION Designed for use in corrosive environments to seal extra pushbutton holes, conduit openings and knockout openings against dust, dirt, oil and water.
PAGE 4
Hole Seals Hole Seals HOL-SEALERS™ Fit These Hole Sizes Catalog Number ASPB05075NM ASPB100125NM AS150200250NM AS300350400NM Fits .5-in. conduit holes 22.5-mm pushbutton holes .75-in. conduit holes 30.5-mm pushbutton holes 1-in. conduit holes 1.25-in. conduit holes 1.5-in. conduit holes 2-in. conduit holes 2.5-in. conduit holes 3-in. conduit holes 3.5-in. conduit holes 4-in. conduit holes EQUIPMENT PROTECTION SOLUTIONS Spec-00182 D Min. Hole Dia. (inch) .86 .88 1.09 1.20 1.36 1.70 1.95 2.38 2.88 3.50 4.